New venom (Atomic) v380 2200kv and 4s configs?

[tlandauer]

has anyone had any success using the stock clamp style motor mounts for motor upgrades?

Not really that I can remember, I burned a motor because the cooling tubes got tangled with the out-runner! They were out of stock that time ( 2 years ago), anyway, I ordered Fightercat 500 class outrunner, the problem is not the clamp but there is NO real estate on the front of most of the out-runners. Venom 's out runners were made to use the clamps. I had to wait until they sent me stock motors.
Assuming that you want to up grade to another outrunner.

[RIPTIDE]

I got one run on my kos and fried a motor using a 4s so Im looking for replacements without having to change motor mounts if I don't have to

[tlandauer]

I got one run on my kos and fried a motor using a 4s so Im looking for replacements without having to change motor mounts if I don't have to

My bad, I was thinking the P1 mono, I don't have the V2 cat,,
I know it is a different motor, although using clamp type mount. I don't know if these motors are physically the same size.

Sent from my Droid using Tapatalk 2

[Livewire121]

I used to have the leopard 28/60 motors in my Ekos, the clamp mounts work with these motors. And they are much better motors then the venom v380's imo.

[RIPTIDE]

I used to have the leopard 28/60 motors in my Ekos, the clamp mounts work with these motors. And they are much better motors then the venom v380's imo.

Awesome that's what I was hoping for! What kind of speeds did you see with your setup using the 2860? I plan to run mine on 4s but will I need to upgrade the stock 60A esc with that motor on 4s lipos? If I don't have to upgrade my collet, drive wire, drive dog, then Id rather keep them stock until those break on me

[Livewire121]

My Leos were 2180kv and I ran them on 6s, but when I tried her on 4s I was getting a solid 40-45mph.
That was with a set of Octura 442's.