Ekis on 10xl duing 51mph

[scubasteve95]

Stop your bringing me to tears...boo who who...

[scubasteve95]

Valium anyone?

BINGO

SEEMS TO BE A LITTLE MORE RELAXED OVER IN NEW ZEALAND

[Rumdog]

That's right, It's a collective battle. All of OSE vs. YOU.

[crabstick]

Valium anyone?

[scubasteve95]

attitude..you should talk.....
all you guys do is give attitude and tear down,
look back at the posts
and like i said when and if it happens its on me..i won't go
pointing and blame others.

[Rumdog]

Lose the attitude and the caps lock buddy. Keep plugging Venom till your boat goes up in smoke, which it will. At that point you may have holes burned thru the hull along with some nifty stains and a putrid smell. 4s is a bad idea. I dont care what you say. Ask anyone else who has done it. Look around the net, not just here. The quality of the electronis is terrible. Definately not suited for 4s as well. Even if they were great, still not 4s motors. Name calling will get you nowhere around here. If Steven Vacarro along with other FE experts are telling you it's a bad idea Why even risk it? You'd trust Venom's hype over them? Good luck with that.

[scubasteve95]

lol you sure you don't work for venom?

wondered when someone was going to ask that...lol

[scubasteve95]

I use 4s 3600mah turnigys. Oh yes, remove the foam in the hatch!

AGAIN FORESCOTT BEAT ME TO IT....
DLG POWER 4s 5000MAH..........EBAY.........$200.00 FOR 4 SHIPPED

[scubasteve95]

VENOM EKOS 4S 5000mah LIKE BUTTER

It had everything to do with that. If I remember right, you said something like Ekos on 4s like butter. It seemed to get us all in an uproar. By the way where did I say you needed a logger to run a boat in that thread? I use the touch method or temp gun all the time.

STEVE THATS WHY I KEEP SAYING IT........
UNTILL IT STOPS WORKING I'M GUNNA KEEP IT OUT THERE.
AND IF I REMEMBER IT WAS THE MARGARITA MORON AND A FEW OTHERS
THAT KEPT SHOOTING THERE MOUTH OFF...
YOU DIDN'T WANT ANY INFO OR OFFER INPUT EIHTER, JUST WORRIED IF I
WAS GOING TO SEND ANY BODY INTO A 4s COMA AND I HAD NO ISSUE
WITH THAT,I'M NOT THERE FATHER.I JUST GAVE THE FACTS

[forescott]

I use 4s 3600mah turnigys. Oh yes, remove the foam in the hatch!

[VIKOS]

I removed the foam from the hatch anyways 3s lipos fit fine and I'm sure 4S will too..depends on which kind you get actually to be honest.

[vasy]

You said you are running with 2 x 4S , 4500 mAh Lipos? How the heck can you close the hatch? At the hobby shop I tried fitting 4Ss into my EKOS but the hatch did not come close to being shut, so I stuck with 3S. What Lipo brand are you using please?

You will not believe: http://www.hobbyking.com/hobbycity/s...dProduct=10869

He bought this battery before measuring the space. It did not fit as you said.
had to rip out the battery mounting tray as well as remove the hard case and wrap the battery in one layer of duct tape.
After had to play with up to mm mounting position but found one that just fits.
Still touches the lid just a bit but not enough pressure to stop the tape from holding on.

[Team Jericho]

You said you are running with 2 x 4S , 4500 mAh Lipos? How the heck can you close the hatch? At the hobby shop I tried fitting 4Ss into my EKOS but the hatch did not come close to being shut, so I stuck with 3S. What Lipo brand are you using please?

[Steven Vaccaro]

it has nothing to do with what i'm running vs his set-up
you and your pals said thats not the way to do it ....period...(joe)

It had everything to do with that. If I remember right, you said something like Ekos on 4s like butter. It seemed to get us all in an uproar. By the way where did I say you needed a logger to run a boat in that thread? I use the touch method or temp gun all the time.

[forescott]

What about the scientific "finger for 5 seconds" to the back of the motor test? does it pass it well?

i do have a temp gun, but I usually dont use it unless something feels unusually hot! Passed the 15-second test!