Installing Seaking/Turnigy 180A ESC in Spartan

[dag-nabit]

Just test-ran my "Albatross" using the "Priamods". I got 43mph out of her, much better than where she started......on fire! I used a leopard 4082 1450kv only because 1500kv weren't available. Installed a second in-hull water pick-up (just to see if I could) ....works great! This thing sprays water like a Rainbird yard sprinkler. Prop experimentation is next. Hey! not bad for a newbee. And again thanks to all for their experience and tenacity.

Hopefully all that water is coming out in the right places.

Kevin

[dag-nabit]

At Brandon's request I'm re-posting pics from OP that have the links messed up.

Lexan Plate - Drilled and Counter Sunk


Lexan Plate - Installed with double sided tape and bolts




Lexan Plate with Self Adhesive Velcro Installed (yes I know it is crooked)


ESC Installed - Caps clear the rail - you can see the layers of Lexan and Velcro.




Kevin

[Rcforever27]

Hey Kevin on my seaking programmer for the lipo cells, setting i have 1-6 and i have it set at 3 cells and then i'n () it says 6 cells with a star that means high voltage esc. Is this the correct setting? Or should it be set on number 6 which is 6 cells or 12 cells high voltage esc ? Thanks fir your help!

[dag-nabit]

Number 6 for 6 cells.

If you have a high voltage ESC the program card will then display additional settings (8, 10, 12 etc.)

Kevin

[Rcforever27]

Ok that's what i thought i have the hobbywing pgm card so #6 it is.... Just confused me because i'n () it says 12 cells..... Thanks for your help...