This thread doesnt have anything to do with what your modded boat does. He wanted to know what RTR was a better value. As everyone seems to agree, it is the Proboat ( by a longshot).
-
-
He never said RTR in his opening post, but i do agree the spirit of his thread was RTR as he said he wasnt modding it other than prop. Thats why in post #2 i shared my stance based on not modding.............i would own the fiberglass Impulse, no Spartan will occupy my Marina.Originally posted by Rumdog View PostNEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Looks like it runs nice.
I was going to get one,
Till i saw the problems they were having.
Now instead looking at modding a 36" shockwave to brushless soon.
Comment
-
If it's like a nitro shockwave 36? and you want to make it a fast brushless? I wouldn't. My dads nitro shockwave 36 gets crazy unstable at WOT.Land, Sea & Air, A true RC Addict.Comment
-
Yes nitro 36" shockwave, thanks for info and at what speeds gets crazy ?Comment
-
Gets unstable around high 30's low 40's. It's a stock nitro one. But has a custom prop. If you bend the trim tabs down it acts better at wot but it's just going slower as the trade off.Land, Sea & Air, A true RC Addict.Comment
-
Ha ha ha...That's great!Originally posted by rinski73 View Postwell here is a "junky toy" busting 67mph
A 67Mph Spartan with a healthy run time. That thing is rippin'. Great Job rinski. What voltage are you pounding into that C/C 1515? It's screamin' that's for sure.
"IT IS BETTER TO REMAIN SILENT AND THOUGHT A FOOL THAN TO OPEN YOUR MOUTH AND REMOVE ALL DOUBT"Comment
-
The speedo gave 6 beeps.............seems like he's crammin' 6s into itOriginally posted by chummer View PostHa ha ha...That's great! A 67Mph Spartan with a healthy run time. That thing is rippin'. Great Job rinski. What voltage are you pounding into that C/C 1515? It's screamin' that's for sure.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Yeah, I think its 2200kv on 6s.....Originally posted by Make-a-Wake View PostThe speedo gave 6 beeps.............seems like he's crammin' 6s into it.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
how about Darin's P-Mono Impulse
that's 4s
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8sComment
-
What a sweet spot to runs boat's you have Rinski.Drammen rock CityComment
-
thanks guys it is running on 6s with 2200kv 1515 castle and it is the perfect place to run
IF IT DON'T GO FAST WHY HAVE IT
Comment
-
Not for long! That setup is pulling huge amps!!Comment
-
its been like that for 6 months getting run on average 10 times a week and not one proplem
IF IT DON'T GO FAST WHY HAVE ITComment
-
I knew you'd say something like that. 240 runs huh? I doesn't take a genius to see that that setup is disastrous. A 1515 1y on even just 4s is really pushing it in a 37" mono.
With all your claimed experience you should know that though.
Reason I'm keyboard battling is because if other guys running this rtr see this they will try the same thing. And it is NOT a good idea.Comment
? ONLY IF THEY WORK 
Comment