PRO BOAT UL-19_How to run on 6S with stock prop
Collapse
X
-
They put a lot of locktite on those outlets. On my Blackjack I actually had to drill it out. I was adding a second outlet so I just bought two new onesOriginally posted by scottyp View PostSam,
How in the world did you get the existing water outlet nipple out of the boat to replace with the 2 larger diameter outlets from OSE? I simply cannot get mine out. When I manage to get a socket around the bolt on the inside (not an easy feat in itself) and then stick a flathead screwdriver into the slot on the outsode of the nipple and start turn it, the flathead just strips the slot away as the aluminum is so soft. I feel like maybe the applied some sort of glue to the threading where the bolt is that caused it to bond solid.
Comment
-
Sam,
DO NOT try to drill out those nipples. I just went to do it and one went ok and the next one snapped right off. Got super hot and snapped the whole nipple off then I couldn't get the nipple off the drill bit so I held the nipple with a pair of pliars and put the drill in reverse and it snapped the drill bit in half. I effectively ruined the ESC before I ever enven got to use it and it happens to be the most expensive part in the boat as well :-(. Unless I can somehow get Horizon or Amain or one of the Dynamite retailers to sell me just the cooling plate I've just ruined a brand new ESC :-(IMG_9459.JPG
Originally posted by sammyha View PostYes. You did. And that doesn't surprise me. You have good ideas of your own too. Try them out, pass em on...
Sent from my SM-G950U1 using Tapatalk
Comment

Comment