Little Twin G

[srislash]

Looking good, something about twins that are sweet music to the ears! A little fine tuning and it'll be screaming and smooth.

Yep,you bet M-a-W. I've got a motor coupler issue right now. I'll disassemble and investigate.I'll try to mod it.It won't tighten enough for the .150 cable.The other coupler is fine.

[srislash]

The motor coupler issue: The problem:collet would not tighten enough



The tool



The fix: slot the collet more so it will tighten enough.Doing all three slots as evenly as possible

[ray schrauwen]

There are reverse couplers out there. 6mm to 3/16" for sure, not sure about 5mm to .150 or 3/16" ??

[tagasagwan]

I had the same coupler issue with my SM29 a couple of months ago. I also widened the slots. Great vid Shawn. So, when will the Komodo build start bud?

[ray schrauwen]

Change to 3/16" cable and use this: http://www.toughracing.com/zc126d/in...oducts_id=2295

[srislash]

Change to 3/16" cable and use this: http://www.toughracing.com/zc126d/in...oducts_id=2295

I don't need 3/16 for the Little G. 3/16 comes with it's own issues. I ordered a bunch of cable stuff from South River and now I have to find a silver brazer local.I thought I could glue them

Good find though Ray.How did you come up with that site? Nice little set of stingers on there.

[ray schrauwen]

They used to have an ebay store but, gave up and just have a website now. Not many people know them. Out of Vietnam I think?

I have a nice cooler for a 36mm motor from them. I've had it on a dozen motors and it works great, just pricey at $20.

I think those Cat hulls are made by Hanspeter? He had something to do with it I THINK?

If you dimple the flex cable (with prick punch) on each side after it's soldered the collet will have more to bite onto.

[srislash]

They used to have an ebay store but, gave up and just have a website now. Not many people know them. Out of Vietnam I think?



I think those Cat hulls are made by Hanspeter? He had something to do with it I THINK?

I would hope so with a price tag of $490 for a 1200cm bare hull

[srislash]

The motor coupler issue: The problem:collet would not tighten enough



The tool



The fix: slot the collet more so it will tighten enough.Doing all three slots as evenly as possible

It worked.Nothing came loose today.Well,my plastic servo horn did.Next dilemma.. At least these are easy problems. Oh and I have got to get some weight in the nose.

[lenny]

Hey,
Just use some tire weights,
That have the adhesive tape on them and cut off what you need.
For temporary testing.

[tagasagwan]

Wow Shawn! This build makes me think that I should start with my Skunkworks2 cat. There's another cat that I've been longing to have. It's the 17" MHZ Micro Iceberg. I lost one last November when a guy beat from a sale.

[srislash]

Wow Shawn! This build makes me think that I should start with my Skunkworks2 cat. There's another cat that I've been longing to have. It's the 17" MHZ Micro Iceberg. I lost one last November when a guy beat from a sale.

Didn't I send you some CF for that Skunkworks Cat?C'mon,get on it.
I'm paying for my R-42 Friday.So I better get on the other cat.

[tagasagwan]

Didn't I send you some CF for that Skunkworks Cat?C'mon,get on it.
I'm paying for my R-42 Friday.So I better get on the other cat.

Yes bro you did and those CF sheets are so nice that I don't want to cut them out! Lols! Just Kidding! I'll start building it soon. I'm just too busy with work lately.

[HYDROJERRY]

To busy with work!!!! i dont no i think i hear a sniffle in your typing maybe you need to take a sick day and work on boats,,,,

[Make-a-Wake]

How did boring out the slots work on the collet?