BJ prop question

[Duclover]

I've had my BJ for 1.5 years now running different set ups and am wondering if there would be any advantage to moving from my Oct X642 s/b to a triple blade Octura v937/3? My current set up is 120a Turnigy esc running either 2 2s 5200mah 30-40c lipos in parallel or running either 1 4s 4500mah 30-40c in series or two of the same in parallel with the stock motor. Even with the timing set at the highest setting allowed for the stock BJ motor I am not experiencing any heat issues with the batts, esc or motor so I'm thinking about other prop options. Any thoughts are always appreciated.

Thank you- Duc

[egneg]

The V prop won't work on a mono.

[tiqueman]

Too much lift from that prop. Not made for a cat... I tried anyways... not good.