Yes sir! Same motor and the Miss GEICO 29 and Blackjack 29. It has proven to be a work horse, as long as the front bearing is maintained; oiled as regularly as the flex cables are greased.
My new zelos 36 twin!
Collapse
X
-
Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751
-
I normally regrease the flex after every 1-2 battery packs. At least after every time I run the boat. The bearings really require that much maintenance?
Comment
-
When talking about 2000kv motors on 6s, yes. For our lower KV motors in the Impulse, Voracity and Zelos 48, I'd say you should maintain them after/before every outing. I pull my flex shaft/s after I'm done using my boat for the day, even if I'll be back out tomorrow. Now I'm forced to grease the shaft when I reinstall it and at the same time I can put a drop of oil or two on the front motor bearing.Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751
Comment
-
Ok. Thanks for the advice. I guess it's not really that bad since the motors don't need to be removed. Is there any particular oil/oiler setup that has worked well for you?
Comment
-
I am quite Jealous! Zelos seems to be the big boy the block!Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda
Comment
-
I use one of these filled with some 3 in 1 multi purpose oil works good
http://www.avidrc.com/product/5/acce...cessories.html
Comment
-
Thanks for the recommendation MXkid!
Comment
-
Website is wrong. They'll ship in 1.5 weeks at the latest.Originally posted by Yellow View PostLooks like expected due date has been pushed back to "late" March. It was "mid" March. Bummer...
More time to prep for its arrival.Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751
Comment
Comment