Is that stock receiver waterproof
NEW Pro Boat "ZELOS 36" Twin Cat
Collapse
X
-
-
Team Orion sends me 90C soft pack LiPos. They don't sell soft packs.Originally posted by Keagan-Z06 View PostHey Rafael,
What batteries are you using in the pic above?
Some say it works, I've never tried it. If the firmware isn't compatible it can corrupt the ESC.Originally posted by petej View PostCan I program the stock Dynamite ESC's using the Seaking LED Program Box?
It is conformal coated, not potted. If you wet it, open the case and dry it, or discontinue use and leave it in the sun to try. If you get corrosion around the pins, clean it off with an old tooth brush. But in all reality, if you tape your hatch you will never get a drop of water in the boat.Originally posted by paulfromtulsa View PostIs that stock receiver waterproofRafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751
Comment
-
Ok. I already balanced and lightly sharpened them. I did that Saturday(3.19.16) night. Then maiden her the following Monday(3.21.16). I'll be going out again Saturday 3.26.16 if weather permits. I have a pair of props I'm gonna try then. I am currently gps poor tho. I need to get another one soon. I just ordered my 2nd pair of the 11.1v 6000Mah 65c graphine packs so more go juice had priority.Originally posted by kfxguy View PostJpraimi, please post in my mod thread when you swap props. Or even sharpen yours.Land, Sea & Air, A true RC Addict.
Comment
-
Can that battery work with ec5 plugs? I just ordered my second set of 11.1v 5000Mah 50c dynamite lipos in preparation for the ZelosOriginally posted by JPriami View PostOk. I already balanced and lightly sharpened them. I did that Saturday(3.19.16) night. Then maiden her the following Monday(3.21.16). I'll be going out again Saturday 3.26.16 if weather permits. I have a pair of props I'm gonna try then. I am currently gps poor tho. I need to get another one soon. I just ordered my 2nd pair of the 11.1v 6000Mah 65c graphine packs so more go juice had priority.Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda
Comment
-
I put my own ec5 plugs on it. As I always put my own plugs on everything I get. Memory is a little rusty but i think ec5 is rated for 120 amps. Esc is a 120 amp also. I have been known to use larger bullets. But this time I was just trying to keep it simple & match what the boat has. Also I can use my packs for my rc truck that I have ec5 on it. Well not the graphene packs but my other 7.4v 95c 7.500mah onesLand, Sea & Air, A true RC Addict.
Comment
-
I got a DX4C DSMR 4-Channel AVC Transmitter with SRS4210 reciver to use on the Zelos. I wanted a water proof reciver for it. I figured I'd ask. Should I run it with the AVC on or turn it off?
Edit:*The AVC system is not recommended for use in RC boats. So I'll leave that feature off.Last edited by JPriami; 03-23-2016, 05:18 AM.Land, Sea & Air, A true RC Addict.
Comment
-
Comment
-
Thanks man! I am dying here waiting on my Zelos, I believe I won't get it until next week after the Easter Holidays. I went to my usual spot the other day to just get a run in, not pushing it, just cruising and took the Phantom 3 out with me, took my dad and my girl and both chicken out when it was time to pilot the drone or boat. So I couldn't get any footage. Will try again soon.Originally posted by JPriami View PostKeagan-Z06, thank you. In those pictures except for the last picture. I was using a Nikon D5500 & the 55-300mm lens.Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda
Comment
-
Sorry for the dumb ? here but how do you "put on your own EC5 plugs" I don't have the boat in front of me right now, so I can't really picture it, do you make them? Buy adapters? How is it done? I would want to give other packs a try but I always see them with Deans plugs, EC3 or some other type of connectors. Thanks!Originally posted by JPriami View PostI put my own ec5 plugs on it. As I always put my own plugs on everything I get. Memory is a little rusty but i think ec5 is rated for 120 amps. Esc is a 120 amp also. I have been known to use larger bullets. But this time I was just trying to keep it simple & match what the boat has. Also I can use my packs for my rc truck that I have ec5 on it. Well not the graphene packs but my other 7.4v 95c 7.500mah onesProboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda
Comment
-
I'm thinking most people want fast and Electric boats seem to outrun the gas? Have no idea, just throwing that lame assumption out there!Originally posted by gfmarlin88 View PostI can't help but wonder why the zelos 48 never had near as much popularity as the 36 twin.....Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda
Comment
-
Plz deleteProboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda
Comment
-
Unfortunately the Zelos 48 was released during winter, or the beginning of, which is not the ideal time to release a boat. I think that, along with the fact that to get top speed it has to be run on 8s, has put some people off. The 36 seems to be more of what people have been asking Pro Boat to make for some time know, along with being 6s compatible for top speed hits a tighter audience. Now that the twin has been released, I am going to start putting more time back in to the project and getting some more tuning in to, and speed out of the boat.Originally posted by gfmarlin88 View PostI can't help but wonder why the zelos 48 never had near as much popularity as the 36 twin.....
You simple solder them on like you would any other connector. Here is a video to illustrate how to solder on EC connectors to a battery; EC3 or EC5, the method is the same. https://www.youtube.com/watch?v=vYpJI1zJXOoOriginally posted by Keagan-Z06 View PostSorry for the dumb ? here but how do you "put on your own EC5 plugs" I don't have the boat in front of me right now, so I can't really picture it, do you make them? Buy adapters? How is it done? I would want to give other packs a try but I always see them with Deans plugs, EC3 or some other type of connectors. Thanks!Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751
Comment
-
Was just looking up videos, thanks as always Rafael. Im getting impatient waiting for the Zelos and this damn windy weather here is not helping the Voracity.Originally posted by Rafael_Lopez View PostUnfortunately the Zelos 48 was released during winter, or the beginning of, which is not the ideal time to release a boat. I think that, along with the fact that to get top speed it has to be run on 8s, has put some people off. The 36 seems to be more of what people have been asking Pro Boat to make for some time know, along with being 6s compatible for top speed hits a tighter audience. Now that the twin has been released, I am going to start putting more time back in to the project and getting some more tuning in to, and speed out of the boat.
You simple solder them on like you would any other connector. Here is a video to illustrate how to solder on EC connectors to a battery; EC3 or EC5, the method is the same. https://www.youtube.com/watch?v=vYpJI1zJXOo
Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda
Comment
-
I don't know, Apexpredator is having some good runs with his Voracity in wind that he says is gusting to 30mph.Originally posted by Keagan-Z06 View PostWas just looking up videos, thanks as always Rafael. Im getting impatient waiting for the Zelos and this damn windy weather here is not helping the Voracity.
Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751
Comment
Comment