flood chamber?

[theShark]

That is sweet. I wonder if it will work with just a 1" hole in the back to drain with big enough holes in the deck?

[785boats]

Well done.
I think you are going to start a revolution. If there is one boat that seems to need a flood chamber it's this one.
Cheers.
Paul.

[H&MWill]

Well done.
I think you are going to start a revolution. If there is one boat that seems to need a flood chamber it's this one.
Cheers.
Paul.

Thanks Paul

[ozboater]

if i m not mistaken i think i ve seen a thread of a bloke (aussie ??) doin this before... looks good... i be interested to see some footage of it on the lake...

nice job

cheers

oz

[eboat]

How far forward does the flood chamber go ?
It looks like it is wider near the front of the hatch kinda hard to tell for sure in the picture
Let us know how it works out on the water cause my boat needs one and if there is anything different you would do next time

David

[brad65]

Down right sick! Mad props. Now lets see some others try it.

[Jeff Wohlt]

I see the long part of CF but how did you block the front from water going on in there? I would think there is a front piece to this CF blocking any water to go up and in the hull.

[H&MWill]

Thanks guys!

[H&MWill]

I see the long part of CF but how did you block the front from water going on in there? I would think there is a front piece to this CF blocking any water to go up and in the hull.

Jeff, There is a piece in the front. It was the hardest part of it was getting under the deck to seal it. A buddy of mine has small hands and was able to get the resin up in there.

[brad65]

have you drove her yet?

[H&MWill]

have you drove her yet?

Not yet. Hope to this coming weekend. Suppose to be 70 degrees so we shall see.

[hookedup]

Will, that is sooo sick!!!!! when i started this thread, i was just looking for someone who had done it already so i could kinda copy. but here you go and get it done in a few days!!!!awesome job!! did you try it with your batts in the hull? hows the fit?

[H&MWill]

The fit is good with 2 packs of Neu 2S lipos. It was tricky to get the balance right at first but I got it and it seems to work good and still keep my c.o.g. I am going to try her out this weekend. So we will see. If nothin else I had fun even if it doesnt work LOL.

[hookedup]

It had all electrics except motor. It had 2 packs of 2S lipos inside. 1 on its edge and one flat down.

got it. sorry, missed that one. ive watched the vid about 20 times!! be sure to get and post a vid of the "real world" run. thanks will!!

[H&MWill]

Will, that is sooo sick!!!!! when i started this thread, i was just looking for someone who had done it already so i could kinda copy. but here you go and get it done in a few days!!!!awesome job!! did you try it with your batts in the hull? hows the fit?

Thanks for all the compliments. It was actually ALOT easier than I thought!