Bodywork on sv27 hull?

[whiplash]

Sup guys, im tryin to figure out the best way to paint my hull. I took a hit in a race
and have resin the inside with cloth around the hole, and marine bondo the outside, and sand it down to finish.
Now i cant find the same color, which is the orange one, so am forced to sand the entire hull and paint an available color localy. my delema is,
is there some kind of gellcoat paint of some sort or,
do i have to sand off the gellcoat off the stock hull,
or will the new paint stick well to the hull with some rough sanding,
or can i find the matching pait,
what should i do?

My aim is to use this hull in races, and if it gets beat up, i dont mind doing glassing, sanding, and painting the fixed area. I just want it to look decent everytime i fix the crashes, without re-doing the whole hull everytime.
Thanks guys. ALOHA

[Tunda]

J iwould repaint the whole hull since youre all most there just sand the rest of the hull and buy some paint that i told you and spray um call me tomorow..............

[whiplash]

J iwould repaint the whole hull since youre all most there just sand the rest of the hull and buy some paint that i told you and spray um call me tomorow..............

alright, alright I'll do it like you said...........shoots

[kck741]

What kind of paint are you going to use

[whiplash]

kck, im not sure what to use, got any idea? today i have bondo the side and sanded down the entire hull, rough to lite, than to 600 wet sand. than painted with primer. going to let dry over night and decide what paint to use. heres some pics

[kck741]

From what I see that primer coat looks good(how many coats are there)!

If you want to use spray paint use Krylon Fusion,but if you want to use something different I would use ASE(All Surface Enamel)Its an acrylic latex paint super flexible and you can make just about any color you want,the only down side to it is you have to use a spay gun!!f you want to use that product I could send you a data sheet,well now that I think about it i can send you a data sheet on the krylon fusion paint too!!




Look at the sig I work for Sherwin-Williams!Ill be more than happy to help you with finding the right paint for the SV send me a p.m

[whiplash]

I have 2 coats of primer, i just started with the wet sand, dried, and the first coatof the first stage of that dupli-color laquer camillion (spelling) paint blue/red
Im also taking pics as i go, so, hope it comes out good. posting later today.

[kck741]

That sounds like it will work out well

[whiplash]

here are some of the first and second stage

[whiplash]

almost finished.......

[Tunda]

Wow J it came out really nice awsome job............... you better watch out for kimo..........

[whiplash]

Tunda,
Did you Guys pickup the hull for Kimo? I installed the spectrum RX today in the llumar and epoxied the wood under the gas tank, It was starting to get soggy.
Also, installed a fuel filter and new futaba servo for the throttle. Next run I am going to experiment with lead weights to minimize blow over coming out of the turns. Shoots

[Tunda]

sounds good kimo wanted to run sat or sun.........

[mr.mauian]

wo cuz nice damage...lol. I know them guys like the inside corner.....dirty buggahz...j/k. West Marine sell a clear gel coat spray and even Fiberglass Hawaii. They get some allright colors too. See ya next week..........

[mr.mauian]

Ohno thats not the mirage paint is it ? My boats are or look the same color.....