Servo Boot For Hull?

[JeepRubicon2k3]

I'm looking for the servo boot for the SV27 hull, I tried the AQUB9503 and they are to small.

[JeepRubicon2k3]

No replacement huh?

[Diesel6401]

No replacement huh?

I tried looking after you first posted and came up with the same number you have.

[m4a1usr]

Have you looked at the Aeromarine boots/bellows? I have used their AER6018 boot and it looks about the right size. Your looking for the boot comming off the back of the servo/radio box with the large nipple, right? Bru-Line makes a large one as well. But I dont remember the P/N.

John

[m4a1usr]

I forgot about the Dubro series seal/boots too. That will fit for sure.

John

[JeepRubicon2k3]

Im looking for the boot that is on the hull.

[m4a1usr]

Im looking for the boot that is on the hull.

Then get the Dubro ones. They come 2 to a pack with the large plastic hull thru tube (you wont need it). Its probably got the largest inner diameter of them all. They are available from several sources. Tower Hobbies lists them as part number LXD589 or google dubro push rod seal p/n dub3108.

John

[JeepRubicon2k3]

I ended up take the one off of the radio box and using it. The new boots will stretch over the radio box but are smaller.