Stock Revolt hit 46,7mph- 75,2kmh

[giobors]

Hi guys
Today I've got 4 runs 2 in the morning the last in the afternoon, same battery recharged.
i was sure that i can squeeze something else from this hull .
his motor set up is stock, but at this motor all i query all that it give me! Great motor for a RTR hull Mr.Grimm!
This morning first run it touch 71.9Kmh- 44.6mph with x645mod
second run cog adjustement 74,2Kmh- 46,1mph m445 great acceleration too.
in afternoon both battery,another cog and trim tabs adjustements 75,2Kmh- 46,7mph m545 better accelleration.
adding some picture, and asap a video of it.

Giorgio
DSCN1956.jpgDSCN1948.jpgDSCN1960.jpgtopspeed.jpg

[Make-a-Wake]

Nice find on the m545.................folks may have never figured out it was the "one" for the stock setup.

I run an x548 on my 39" mono, not many folks seem to mess with the 5 series, but they are a "diamond in the rough" for the right situation.

[giobors]

Thank you guys
I have to apologise me for a not correct data, because the 44.6 with x645 was hit in the afternoon not in the morning how i wrote, rewiewing the pic... "the circle wasn't closed"... too much prop swapping! nothing to worry just for precision.
while all speed/prop comparision are right.
About 1.5 prop ratio it surprise me for the great accelleration too,that i think penalized vs topspeed.
I have not motor/ESC temperature data because with all prop, them was been all time barrely warm also if water temp was 23-24°Celsius.
Run time?.... You can discovery it directly by the video that i'm going to upload

Giorgio

[MAMBA2200]

great speed gio

[giobors]

Thank you Mamba
I'm very happy with this boat, she feel every adjustement.
She has a good start project.

Giorgio

[giobors]

That is the video;

http://youtu.be/Q1rgjV4bVBo

Grrrcamera start recording too late, i haven't add music so is possible hear the total rpm's.
at the end you can see me and the best model that i've done!

Giorgio

[MAMBA2200]

i wouldnt change a thing that is a great run o and ps dont add music

[giobors]

Ok no music also i agree blade sound

[ray schrauwen]

What C rating are your cells Giorgio?

Very nice. I have a 545 in my box to try now you have done the testing for us, thank you!

[giobors]

Hi Ray
Thank you battery are turnigy 2x 2s 4,0mAh 40-50c they have only 6 cycle,they are on themself best.
Take a look at temperature with m545 if you have stock cooling circuit

Giorgio

[giobors]

Hi Guy the next step i want try the grim 45/68 that i've already S&B and the 44/66 still not S&B.
ASAP if possible because too much wind actually

Giorgio

[Grimracer]

Giorgio, Congrats, your Revolt 30 is running great.

Guys reading.. here is what I like about this. Giorgio has taken it upon himself to make the most of what the boat offers. No silly mods or nutty voltage.

He has it TUNED FANTASTIC and does not expect more from the water then the boat is capable of. His turns are well thought out and only uses what power is needed when the pass looks good.

Giorgio.. you have my attention and my respect! VERY WELL DONE MY FRIEND!

Grimracer

[gyrotron]

Nice run Gio. Can you post a picture of your boat's transom to have a look at your trim tabs and turn fins setup? Thx.

[MAMBA2200]

I would love to see it also:D

Sent from my DROID RAZR using Tapatalk 2

[giobors]

Giorgio, Congrats, your Revolt 30 is running great.

Guys reading.. here is what I like about this. Giorgio has taken it upon himself to make the most of what the boat offers. No silly mods or nutty voltage.

He has it TUNED FANTASTIC and does not expect more from the water then the boat is capable of. His turns are well thought out and only uses what power is needed when the pass looks good.

Giorgio.. you have my attention and my respect! VERY WELL DONE MY FRIEND!

Grimracer

Thank you guys,thank you Mr Grim what i can say i'm very satisfied of this boat... but open the forum page and found this... you can only immagine my emotion
Only i have understand this fine project, and i've got good results also thanks to other rc boaters Revolt owner.
this push me do it better, i'm think to "remove dust" from my old eagle tree v3.
As you query i'm add fresh transom pics.DSCN1963.jpgDSCN1964.jpgDSCN1968.jpgDSCN1969.jpg