Might want to start a new Fourm Topic!.. New from AquaCraft!

[detox]

Traxxas once came out with a new hull called the Revolt, BUT had to change the name to Spartan for some odd reason.

[Stinger9D9]

Traxxas once came out with a new hull called the Revolt, BUT had to change the name to Spartan for some odd reason.

Aren't you thinking of the Titan?
pr-june2010-traxxas-titan-boat.jpg

[detox]

Sorry about that. I think Revolt was one of the names somebody suggested on their site

[Steven Vaccaro]

Thanks!

[longballlumber]

I had a chance to race one of these hulls in our April 29th Club race... I raced it in both P-Limited Offshore (4 min) and P-Limited Mono (6 Lap Sprint) just by making a prop and battery change. This hull has HUGE potential. My hull has the 1800Kv motor, and I am 99.9% sure the production boat will come the same way.

While I have A LOT more tuning to do and props to test, the 1800Kv is the ticket in this thing! So far it’s handled any prop I have thrown at it in the 45mm range without any heat what so ever.

Racing at our club race, the boat wasn’t the fastest in the heats, but this boat turns so well out of the box, that I was able to have good finishes with a couple of heat wins by making the other boats pass me on the outside. Lots of fun, I can’t wait to get some more testing/tuning and some eagle tree data.

Here are a few pictures that I have. None are that great, but here you go…

Sorry guys... I can't seem to load pictures from work all of a sudden. The picture manager pops up but nothing showing the box.. I will keep trying.

Later,
Mike

[Grimracer]

Thank you sr.. may I have another!

[ray schrauwen]

Simple, clean and with spacious access. It gets better with every picture.

One small concern, the stuffing tube looks unsupported somewhat? Supported underneath most likely?

[Grimracer]

Simple, clean and with spacious access. It gets better with every picture.

One small concern, the stuffing tube looks unsupported somewhat? Supported underneath most likely?

Ray.. Understand.. The Stuffing tube is quite short.. I did not make a support for it.. Having said this for anybody concerned let me know. And, its leaves the door open for Jan at Kintec (or other) to make a part for it! Lol

Thanks again for liken' the layout.. I have a ton of work into this boat and our hopes is that all who join in realy enjoy it!

Grim

[ray schrauwen]

If you say it is no concern I will go with you on that. I will trust you on this one.

I have done a 29" mono the same way with no problems, still runs fine.

I'm just anal on details sometimes. Bad habit.

[Grimracer]

If you say it is no concern I will go with you on that. I will trust you on this one.

I have done a 29" mono the same way with no problems, still runs fine.

I'm just anal on details sometimes. Bad habit.

Ray
Its always good to keep asking stuff like that. The more I think I know about this stuff the more I realize how little I know!

Thanks

Grim

[Grimracer]

Just got a note the webpage is done and they are in the final stages.. looking good!

Grim

[Grimracer]

One UP!

Web page is live!

https://www.aquacraftmodels.com

Remember to also "like" us on Facebook!

REVOLT AND ROLL!

Grim

[Darin Jordan]

All systems engaged!

[dana]

They look awesome! I love how aquacraft does different colors. TheY perform too! Still love my ul1...-)

[Grimracer]

All systems engaged!

Allways a ton of work aint it Darin!

thanks dana!.. and glad you are digging your UL-1.. I also happen to really like that scooter too!

Grimracer