First run with the UL-1

[LuckyDuc]

I'm thinking I need to glass as much as of the sponson as I can get to on the turn fin side since it's already cracked in so many places.

I can't wait to see the mess I made with the epoxy injections.

Thanks for the idea LuckyDuc!

I used 1.5oz SIG fiberglass and Z-poxy finishing resin to strengthen mine. 10 layers on the inside and 2 on the outside. A little over kill perhaps, but I didn't want to repair it twice.

[brad65]

I used 1.5oz SIG fiberglass and Z-poxy finishing resin to strengthen mine. 10 layers on the inside and 2 on the outside. A little over kill perhaps, but I didn't want to repair it twice.

Damn dude that great also.

[detox]

Guys,
You can also drill small holes in the sponson area then inject whatever type of glue you choose using a disposable syringe like this one. I like using 30 minute epoxy mixed with fiberglass. I puchase five of these syringes for odd jobs like this one.
http://www3.towerhobbies.com/cgi-bin...?&I=LXGGG7&P=7


...