Looking for suggestions on prop starting point for my boat. It is a 44" Aeromarine Avenger 44 with twin TP4070 1090kv motors on 12s. Any help would be appreciated.
Thanks.
Thanks.
-
-
Are you sure it is 12's to each motor, or 6'S to each motor ? 12'S is too high on the RPM (48,000)
What is it that to plan to do with the boat?
LarryLast edited by TRUCKPULL; 09-04-2018, 01:09 PM.Past NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & Wet -
It's at the upper limits. Can run it for saw passes.Comment
-
-
-
StanOriginally posted by Hawkeye View Post
SAW - is two passes, one in each direction. - then bring it in slow - and let it cool down completely, recharge and try two more passes.
With your setup - this is about all you can do, without hurting something.
Fun running would be out of the question.
LarryPast NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & WetComment
-
I'm new at this. So I may need to back it down to live. Lol. So 6s would be max for said combo? I have alot to learn.Comment
-
with 1090 KV - 8'S to each motor would be fine for fun running.
LarryPast NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & WetComment
-
Thank you sir!Comment
Comment