Need prop recommendation for HET 1170kv in Whip40

[ray schrauwen]

I have been recommended to use some ABC props but they are not available to me before I'll run this again before winter.

What about some Octura of Prather props?? I have some large ones that I can modify to a certain degree, just no pitch gauge.

Runs on 6s2p 8800mha total old Revo diamond packs.

I have a 59mm 3 blade 1.4 pitch prop shop prop, I think. It's equivalent to an Octura 459 x3 I think but less tongue.

[Fluid]

That is 'way too much prop if you intend to race. I don't know what props you have, but try the equivalent of an x452/x445 or in that area. That motor is similar to a Neu 1527/1Y.



.

[dasboata]

If I can help you out Ray LMK

[oscarel]

For octura anything between 450 - 455 would work. I'm running a new ABC 1915 17 degree from Chris and really like it.

[ray schrauwen]

If I can help you out Ray LMK

I tried Chris, you said you didn't have a 2215-17-45% since the 2315 might be too much.

I tried to contact Walt Barney but not successful .

Thanks for the suggestions , I have some props in this range. I'll check back to tell you guys what I have.

[dasboata]

I tried Chris, you said you didn't have a 2215-17-45% since the 2315 might be too much.

I tried to contact Walt Barney but not successful .

Thanks for the suggestions , I have some props in this range. I'll check back to tell you guys what I have.

I have it now Ray in stock!!

[T.S.Davis]

X455/2 with the tongue removed and a little cup added in just fer fun.

[ray schrauwen]

I have it now Ray in stock!!

Thanks, sent you PM.

[ray schrauwen]

X455/2 with the tongue removed and a little cup added in just fer fun.

I have one Chris did for me. I think its lightly detongued but I can't cup squat. Never done it, don't want to wreck this nice big prop right yet.

[dasboata]

I have one Chris did for me. I think its lightly detongued but I can't cup squat. Never done it, don't want to wreck this nice big prop right yet.

send it to me over the winter,, Just cover the shipping !

[ray schrauwen]

Yep, and I'll get the 2215-17 on the return voyage, thanks Chris!

[ray schrauwen]

send it to me over the winter,, Just cover the shipping !

Sounds good. You could send me another finished prop or two as well. I'll let you know soon.

Thanks!

[dasboata]

Sounds good. You could send me another finished prop or two as well. I'll let you know soon.

Thanks!

Yes of coarse you know I also have a 1455 the 1400 series are pretty good hydro props thanks Chris