New abc props

[kfxguy]

Have any of you guys noticed there's some new props popping up in the ose store? I've been trying a few and have had really good results. I have a new chart but I've got to figure out how to post it. Not all are available just yet.

[kfxguy]

Here's the charts

[raptor347]

Oh yes. The new props are very good.

1817-17-45 is my new go to prop for P-ltd hydro. The 1815-17-45 R is hard to beat on a 1/10 scale.

[kfxguy]

Oh yes. The new props are very good.

1817-17-45 is my new go to prop for P-ltd hydro. The 1815-17-45 R is hard to beat on a 1/10 scale.

Yes they are very good!

[shua]

Thanks for posting the Chart! Now I can see what number to order and try out!

[kfxguy]

Thanks for posting the Chart! Now I can see what number to order and try out!

No problem. If anyone doesn't know how the numbering system works just let me know and I'll help you as much as I can. It's a but different than octura but still easy to understand.

[T.S.Davis]

1817-17-45 is my new go to prop for P-ltd hydro. The 1815-17-45 R is hard to beat on a 1/10 scale.

Is this something custom? It's not on the chart.

[shua]

No problem. If anyone doesn't know how the numbering system works just let me know and I'll help you as much as I can. It's a but different than octura but still easy to understand.

I like how the chart lists Diameter in inches and mm. I take it that a 1.7" (43.2mm) x 1.4" pitch to be similar to an Octura 443?

[kfxguy]

Is this something custom? It's not on the chart.

Thanks terry for pointing that out. I accidentally left that one off. Fixed.

[kfxguy]

I like how the chart lists Diameter in inches and mm. I take it that a 1.7" (43.2mm) x 1.4" pitch to be similar to an Octura 443?

Sort of. The pitch on the abc props is (from what I was told) more accurate than the octura pitch. Although because they seem to be more efficient they don't load the motor any harder but will be fast (in all of my tests anyway).

[srislash]

Sort of. The pitch on the abc props is (from what I was told) more accurate than the octura pitch. Although because they seem to be more efficient they don't load the motor any harder but will be fast (in all of my tests anyway).

And the increased 'rake' negates the effects of transom lift as 'rake' promotes bow lift.
Just thought I would add this Travis.

[Jamey]

What are the differences for cleaver versus chopper?

[dasboata]

Is this something custom? It's not on the chart.

probable meant 1815/17-45 R I have them in stock thanks chris

[dasboata]

What are the differences for cleaver versus chopper?

cleavers have point ears and the choppers have big round ears there are other differences also !!!

[Jamey]

lol Yeah I understand the differences in the look, just not sure how the use of each. In regular boats cleavers usually have a lot of stern lift and almost always are used in very high performance applications. So in a sport 32" mono deep-vee would I consider both cleaver and chopper or only cleaver?