After a long night in the shop I've started building two hydromites. I got all of the laminated wood pieces made early this afternoon, and started cutting parts, I got most of the parts cut out this evening before I broke my only scroll saw blade. I need to pick up some more scroll saw blades and some more plywood to finish the last few parts.
Power for the first one is going to be from a Turnigy SK3 2836 2500kv outrunner, with a 45 Amp proboat watercooled esc. I have a watercooled motor mount I will be using as well. I currently have 3s batteries in the right specs/size to fit the hull.
Hardware is going to be the OSE micro strut/rudder setup, with the .098 flex cable and 1/8 shaft. Radio will be my Spektrum DX4S, undecided on a steering servo so far.
I need to build a jig for building the boat if anybody has an idea of what works, I was thinking just ripping a flat wood plank an inch or so thick, the width of the tunnel and building on top of that.
20210709_014744.jpg
Power for the first one is going to be from a Turnigy SK3 2836 2500kv outrunner, with a 45 Amp proboat watercooled esc. I have a watercooled motor mount I will be using as well. I currently have 3s batteries in the right specs/size to fit the hull.
Hardware is going to be the OSE micro strut/rudder setup, with the .098 flex cable and 1/8 shaft. Radio will be my Spektrum DX4S, undecided on a steering servo so far.
I need to build a jig for building the boat if anybody has an idea of what works, I was thinking just ripping a flat wood plank an inch or so thick, the width of the tunnel and building on top of that.
20210709_014744.jpg
Comment