16.5 " JAE rigger

[Jim Bob]

Took her on the maiden voyage today. I Think I don't have the CG correct. I will try again with the battery moved forward a little.

http://www.youtube.com/watch?v=mPA6JTTcqK8

[HOTWATER]

Very nice! Looks like it's balanced pretty well. Turns nice!

[badag98]

What are you running in that little rocket it was hauling! Looks like you had to fish her out there at the end

[Jim Bob]

Feiago 380 7s 2s 2650 x432 detongued and back cut. Yeah I did have to fish it out. I had to fish it out on every run but the one in the video below. Sorry for the camera work. My cameraman is 11. I guess I need to tweak it a little to keep it from getting upset coming out of the corners. I will mess with the CG to see if I can correct it. Any JAE experts, I am open to suggestions.

http://www.youtube.com/watch?v=4VBqG3N79Tk

[Doug Smock]

I like it!!!!
You want 60% of the weight on the sponsons and 40% on the ski.
Can you post some pics?
Doug

[old guy]

You should send what you did back to the guys that build them so they can cut some for sale,it looks fun

[Jim Bob]

some pics from my phone.

[Jim Bob]

And a few more.

[wparsons]

Where'd you get the hardware, is it all custom made?

[Ron Zaker Jr]

Feiago 380 7s 2s 2650 x432 detongued and back cut. Yeah I did have to fish it out. I had to fish it out on every run but the one in the video below. Sorry for the camera work. My cameraman is 11. I guess I need to tweak it a little to keep it from getting upset coming out of the corners. I will mess with the CG to see if I can correct it. Any JAE experts, I am open to suggestions.
http://www.youtube.com/watch?v=4VBqG3N79Tk

Looks great! You need to widen the sponson foot print and use a Miss Vegas turn fin. Please call Rod Geragthy,he would like to talk with you. Great job.

[Jim Bob]

Hardware is all custom made.

[geraghty]

Feiago 380 7s 2s 2650 x432 detongued and back cut. Yeah I did have to fish it out. I had to fish it out on every run but the one in the video below. Sorry for the camera work. My cameraman is 11. I guess I need to tweak it a little to keep it from getting upset coming out of the corners. I will mess with the CG to see if I can correct it. Any JAE experts, I am open to suggestions.
http://www.youtube.com/watch?v=4VBqG3N79Tk

Send me your phone number......you are very very close....we have been there,done that....I can help you......[your CG isn't causing your problem]

Rod Geraghty

geraghty@nelson-tel.net

1-715-926-6096

[old guy]

Ron if you make this I want to be on the list for one with hardwhare I have 2 of your 12Rs and this one would be just to much fun at least post the plans for this size on you web page for us. But a kit would be nice

[geraghty]

Ron if you make this I want to be on the list for one with hardwhare I have 2 of your 12Rs and this one would be just to much fun at least post the plans for this size on you web page for us. But a kit would be nice

As we speak the JAE team is at work developing smaller FE mini,
micro and nano size FE hydros......
It is in the works to release plans and kits for the boats from Zippkits......

[Joe Petro]