Bullet connectors...best way to install them.

[ozzie-crawl]

i also follow the red hot female approach but add 2 pieces of heat shrink over the female plug and never had a problem

[Jeff Wohlt]

A Harness is just asking for more trouble. I have used them for years on brushed but not BL stuff. No reason to.

[MLJones8]

For a cap of the male bullet, get some 1/4" ID clear vinyl tubing at the hardware store! Cut it in 1" lengths. 5.5 and 6mm bullets fit great!

Thats assuming the male bullet is on a hot wire (i.e. positive), correct? There is no need to cover a ground, is there?

[ozzie-crawl]

my male bullet is negative wire, thats what i cap, as long as it cant contact anything doesnt matter if pos or neg really