Prince Mono Hull

[bustitup]

this mono is 29" long and I'm afraid the UL1 motor will not have enough torque, in the UL-1 page it seems 40mm props are the one, also the motor is a 36-56, on my 29" I have a Feigao 8XL, same KV as the UL-1 motor but 36-74 size and I'm spinning a 42mm prop.
also the UL-1 is an Hydro so much less drag than a mono, IMO the UL-1 motor would fit better in the 25" mono see here

Ed my prop question WAS for the 25" mono

[ED66677]

lol sorry ya know I'm french! you got the answer then! if Steven is out of stock on it, get a cheap chinese one and sell it ARTR once the DF is back in stock!
even though I practice my english every day since many years already ('cause I work for an American company) I sometime experience difficulties to 100% follow a thread, some kind of "brain stall"!!!

[bustitup]

lol sorry ya know I'm french! you got the answer then! if Steven is out of stock on it, get a cheap chinese one and sell it ARTR once the DF is back in stock!
even though I practice my english every day since many years already ('cause I work for an American company) I sometime experience difficulties to 100% follow a thread, some kind of "brain stall"!!!

lol....ed you still have it wrong...my question is what k series props would be suggested to run on a 25" mono with a ul-1 motor with a 120 amp esc on 4s

[ED66677]

What I ment by "you got the answer" is that on the UL-1 page you have the recommended prop for it, size are in mm so it is "easy" to pick the corresponding prop in the K serie, these are 40x52 3blades, 38x55 2 blades and 40x57 3 blades, the strange thing is that the 3 blades are bigger than the 2 blade??? but I would start with a K37.5 (pitch = 51mm), then K39 (pitch = 54mm) to a K40.5 (pitch = 55mm) maximum, if you plan to run 5S you'll have to go down to a K36 I believe

[M.M.]

OK, so i have heard many things about these boats now. So i need a couple more things answered before i mkae my decision.

1) Is the hull any good? from what i have heard it is.
2) What are the things that are breaking on these boats? Besides electronics which i will supply
3) What is a good, yet inexpensive motor to run in here? with my 120A esc
4) Whichever parts break on this boat, can i get better parts to replace them? Such as the flex cable, could i put a 3/16 one in there(or whatever size)?

[bustitup]

OK, so i have heard many things about these boats now. So i need a couple more things answered before i mkae my decision.

1) Is the hull any good? from what i have heard it is.
2) What are the things that are breaking on these boats? Besides electronics which i will supply
3) What is a good, yet inexpensive motor to run in here? with my 120A esc
4) Whichever parts break on this boat, can i get better parts to replace them? Such as the flex cable, could i put a 3/16 one in there(or whatever size)?

EVERYTHING you ever wanted to know about the prince is right here

http://www.rcuniverse.com/forum/m_7713767/tm.htm

[M.M.]

I have read that several times.

Well i am going to take the plunge and buy this boat:
http://cgi.ebay.com/ws/eBayISAPI.dll...m=290309669317

But i worked a deal with him to sell it wothout the motor/esc. Since those seemed to be the main things breaking. So now my question is what is a good motor that will work with my 120A esc? I was think like a fieago 540L. What others are there?

[Rumdog]

that motor or the AMMO 2300. The Ammo is a very efficient motor and will make this boat a missile on 4s!!

[ozzie-crawl]

i run a ammo 2300 on 4s with a detounged x440 prop runs constant 45mph
i also think the ul-1 motor would be a good bet with a bit bigger prop it will have that extra tourqe the ammo doesnt have.if your esc is good you could run a 8xl but it would be a missile
just make sure the motor mount will take a 540

[M.M.]

Well its all paid for, now its just time to play the waiting game.

[M.M.]

Would a feigao 8xl be way too much for this boat?

[ozzie-crawl]

a lot would depend on prop you could prop down until you got used to the boat and setup, these boats handle extremely well with guys pushing them over 75mph. i have had mine to 50mph and it was still very stable with no backing of in the turns

[M.M.]

How do they do through the rough? I don't mean full throttle, but just average speed?

[ozzie-crawl]

they run better with a slight bit off chop. at 45mph in race water they are fine. if you set them up rite they are very stable

[M.M.]