Medusa Motors, anyone using them?

[jingalls007]

You guys are taking this WAY too seriously

Hey you started it!

[Himalaya]

I am quite serious that the 3680 in any form will be too much for a boat that small. I don't believe you will be able to open it up full throttle on 4s and a kv of 2000. The 3670 will be a better match in say 2300 on 4s.

I run 3680-1600 in my 32" DF mono, last sunday it was sucking 127A out of my 6S2P 5200mAh LiPo driving a Y537-3 when reaching 93km/h。

I was juicing 2700W power from this blue little monster which it's rated 1300W continuous.

[Adrianli]

Hi guys,

I run a 3680-2200 in my 33" DF (copy) on 4S lipo and it rocks!!!

I attached my motor photo and my elogger graph.

[Brushless55]

Hmm, I might have to try a 3680 - 2200kv in my revo!

[jingalls007]

Hi guys,

I run a 3680-2200 in my 33" DF (copy) on 4S lipo and it rocks!!!

I attached my motor photo and my elogger graph.

what diameter cable do you use for this?

[Adrianli]

what diameter cable do you use for this?

I am using octura 0.150" from OSE.

[Brod]

I ordered 2 of these motors.
How long,roughly did it take for your motors to be built and delivered?
Asuming you all bought from http://www.medusaproducts.com/motors/036-V2.htm
Brod..

[Adrianli]

Mine was a pre-order one. So it took me two months wait.

[RPC1]

Three days for me.

[DINO7]

1 week for me.Greece.

[Brod]

Thanks for the replies.
My order is out of stock,ie a back order.
Jeff Little,in an email, told me my motors should take 2 weeks to sort out.
I hope he is right
Brod...

[LuckyDuc]

Thanks for the replies.
My order is out of stock,ie a back order.
Jeff Little,in an email, told me my motors should take 2 weeks to sort out.
I hope he is right
Brod...

Did you have a custom motor made to order?

[EPower]

Hi guys,

I run a 3680-2200 in my 33" DF (copy) on 4S lipo and it rocks!!!

I attached my motor photo and my elogger graph.

Nice jacket did you make it ??

[Adrianli]

Nice jacket did you make it ??

Nope, I got it from Etti. Same size for any Neu 1515, Feigao 540 or Hacker 540 motors.

[EPower]

Nope, I got it from Etti. Same size for any Neu 1515, Feigao 540 or Hacker 540 motors.

do you have a link to the website ?? Thanks
Adrian