Power Suggestions For 29'' Rico Mono

[Flying Scotsman]

The 9XL, Etti 150 and a x442 should be a bulletproof setup in that hull.
I've run that setup with a Barracuda 80 with no problems.

Good luck with her,

Doug

Agreed, I have a similar system in a DF 29...9XL..X442...2 5000 2S 1P 25C in series, Sentilon 100 HV ESC.


Douggie

[focused]

Speaking of xl8 and xl9 in this video http://vimeo.com/3912063 both on 6s lipo Zippy H 5000mah 45mm K-prop and not even full throttle yet . It was the second testing day so we`ll take it easy but no heat problems so far.

Boat nr 1 is a Hydro-Marine Xray-L wanderer(nemesis) 20xl8 6s lipo Zippy H and ETTI 125A first run 45k Prop , second run 42x55 grimracer.

Boat nr2 is a MHZ Lizard feigao 540xl9 6s lipo H zippy 5000mah ETTI 125A 45k prop.


Michiel.