Need Water Jacket

[MarkF]

The motor is 5 1/4 long and the finned part is 3 1/4 L The OD is 57mm and the finned part is 63mm. That makes the fins 3mm tall with a spacing of 2mm between fins. The fins could be machined down a little if necessary.

Mark

[ray schrauwen]

What is fin od? What is space betWeen fins?

[pescador]

I wonder if it?s something that Stumpfab could make


Sent from my iPhone using Tapatalk

[MarkF]

Yea the owner of HRC died ears ago. The 2230 is a 56mm motor and this one has fins on it so it's big.

[pescador]

I got mine from HRC manufacturing years ago.
I searched around on the net for ya but unfortunately I didn?t come up with anything.


Sent from my iPhone using Tapatalk

[pescador]

Need Water Jacket

That's 40 mm correct? I have a couple I used on a 1527 probably would work. I would have to check

56mm or 63mm with fins



Sent from my iPhone using Tapatalk

[meangenesracing]

That's 40 mm correct? I have a couple I used on a 1527 probably would work. I would have to check

[MarkF]

Anybody have a water jacket for a Neu 2230 laying around they want to sell? Or do you know where I can get one?
Thanks
Mark