Hi all,
Well have moved on from my vector SR80 now
owner of TFL Pursuit with integrated drive.
Setup is
TP 3650-208kv
Seaking 180amp esc
4500mah 6s lipo
46mm x 1.4 pitch cnc ali prop or can use 45mm x 1.4
So question probably asked 100 times but i will be 101 haha
I know on my rc planes i can just plug in a watt meter and get amp draw watts etc
I tried it on my boat and well boat hardly moved as watt meter was like a brake.
So my question is how do i find this info out.
I have run the boat with this setup (46mm prop) about 4 full trigger passes
doing oval circuits and things get hot not boiling but hot to the touch 60-70c
caps i can't touch they are hot.
So just trying to figure out how much amps I'm drawing.
New to Fe boats so hopefully someone here can point me in right direction
Thanks
Well have moved on from my vector SR80 now
owner of TFL Pursuit with integrated drive.
Setup is
TP 3650-208kv
Seaking 180amp esc
4500mah 6s lipo
46mm x 1.4 pitch cnc ali prop or can use 45mm x 1.4
So question probably asked 100 times but i will be 101 haha
I know on my rc planes i can just plug in a watt meter and get amp draw watts etc
I tried it on my boat and well boat hardly moved as watt meter was like a brake.
So my question is how do i find this info out.
I have run the boat with this setup (46mm prop) about 4 full trigger passes
doing oval circuits and things get hot not boiling but hot to the touch 60-70c
caps i can't touch they are hot.
So just trying to figure out how much amps I'm drawing.
New to Fe boats so hopefully someone here can point me in right direction
Thanks