2650kv motor on 6s?

[tjsb]

would this be to much voltage for this 4068 2650 motor.

Thanks

[NativePaul]

Yes, I see that as an awkward middle ground that's a high Kv motor for 4s, or a low Kv motor for 3s.

For almost all uses its way too high Kv for 6s. You might get away with it for SAWs, but all SAWs setups are a potential fire waiting to happen.

[LibertyMKiii]

It will get very hot very quickly. Plus the ESC might cut power based on the amperage being asked of it.

From my limited experience something around 1600-1800 kv seems to be good for 6s use.

[Gary]

That's 67,840 rpm on 6s. Nope !!

[tjsb]

Thanks