Hello fellow boaters, I had a little accident at the lake last Sunday. The ESC decided to burn up and spread all this black tar-like mess all over the inside of my boat. Do you guys know what works best to clean that goo off ?
-
-
Try a paste made of baking soda.A nation of sheep breeds a government of wolves -
I have sprayed a light coat, over the burnt location inside of the hull with clearcote. It sealed the odor with no problems.ReddyWatts fleet photo
M1 Supercat - Neu 1527 1Y, 8s / Mean Machine- Feigao 580, 8s, 120 HV esc
Mean Machine - Feigao 540 14XL, 8s, 100 amp HV esc, X537/3Comment
-
Alcohol works well,,lots of it. And I don't mean taken internally!Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellersComment
-
Methylhydrate, works quick. 1 or 2 wipes with a saturated paper towel and goodbye mess and smell.I try and avoid paste eaters.Comment
-
The best thing for cleaning the smell and discoloration from your hull is denatured alcohol. Use it generously.Comment
-
That made me laugh...Originally posted by Doby View Post
What about Acetone? But it may be too harsh on the paint. I will try both denatured alcohol and Acetone tomorrow. If i can find some Methylhydrate, I will try that too.Comment
-
Acetone doesn't work, but denatured alcohol will make the smell and the stain disappear. Just apply it liberally, brush it around a little with a paint brush, and then wipe it off with a rag.Comment
-
I can't offer any new suggestion as to cleaning the inside of your hull, but where are the pics of the burn.????
See it....find the photos.....sketch it it....build it........with woodComment
-
I have used Brake Cleaner in a can with great results in my esc torching past.
Comment
Comment