It appears the Seaking 180A has some issues with cut off at full throttle based on feedback from my previous post. I'm running Venom batteries 5000mAh 50C 6s on a Traxxas M41, 42/63 prop, Leopard 4082 2200Kv motor. Programming the Seaking with lower LVC or auto calculate or changing timing from 0, 3.5, 7.5 11.5 doesnt remedy the problem. Any suggestions on a different ESC?
-
-
Removed and replied to other thread.Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR -
The issue is your set up but I would run this one.
https://www.offshoreelectrics.com/pr...d=hef-HBX1200LComment
-
Thanks, I appreciate the comment. Pretty fancy ESC, only question I have left is when I did turn off the LVC it worked?Comment
-
This has been explained in another thread. That ESC has an internal design/build flaw concerning the LVC. Others have stated that turning the LVC off solves the problem....but you have to time your runs.Thanks, I appreciate the comment. Pretty fancy ESC, only question I have left is when I did turn off the LVC it worked?
.ERROR 403 - This is not the page you are looking for
Comment
Comment