P rigger recommendations

[StevenBryant]

Hey guys I'm looking at recommendations for a P rigger, I plan to run a castle 1515 2200kv motor with a converted XL2 esc,

Cheers
Steve


Sent from my iPhone using Tapatalk

[Thomas Schlarb]

I've got a sgx eagle rigger I was going to do the same thing with.. it would be a great winter project.

[StevenBryant]

Hi Thomas the 45 SGX is too large and heavy for my application Im going to run a castle 1515 motor which will be too small for a 35 inch nitro hull. I was originally going to use a JAE 21FE but to be honest I'm not keen on how they handle. Are there any other 4cell riggers about?


Sent from my iPhone using Tapatalk

[Thomas Schlarb]

I like the JAE 21FE as well

[Thomas Schlarb]

You know the JAE 21 is 31" right?

[StevenBryant]

Yep I have have one sat on a bench in front of me with a 21 MAC in it. Im just about the sell my JAE, it is insanely fast but just not for me. I run the SG, SGX riggers they are amazing boats but run heavier in the water than the JAE/Keps.

My Q hydro/rigger is a 45SG rigger so I am looking for something smaller for the P class.


Sent from my iPhone using Tapatalk

[Thomas Schlarb]

Gotcha. I've got this one that I'm doing the same setup to. The label in the hull says aeromarine laminates 1449328783998-739642484.jpg

[StevenBryant]

If I iced in the states I would have had your eagle but being in the uk the carriage would be too much. What are you putting in your boat?


Sent from my iPhone using Tapatalk

[Thomas Schlarb]

Neu 1515 2200kv, SF200 amp esc, 4s

[grsboats]

This is the Spirint rigger Aeromarine offered years ago...I had one equipped with a Picco P5.....great boat with a strong .21.....don't know if there's enough room for a Fe .Gill

[monojeff]

I'm gearing up for some keps kits from ne-stuff plans at start of the year.
Just another option.

http://www.ne-stuff.net/?m=1

[HOTWATER]

Gotcha. I've got this one that I'm doing the same setup to. The label in the hull says aeromarine laminates [ATTACH=CONFIG]139301[/ATTACH]

I believe that is an Aeromarine Stinger...I was at Aeromarine in the early 90's and talked to Remy about them. It was a new rigger that was still in the testing phases and was told that they had problems trying to keep it on the pipe...

Cool Riggers! Hope there is room in there for a nice FE setup!

[Thomas Schlarb]

I believe that is an Aeromarine Stinger...I was at Aeromarine in the early 90's and talked to Remy about them. It was a new rigger that was still in the testing phases and was told that they had problems trying to keep it on the pipe...

Cool Riggers! Hope there is room in there for a nice FE setup!

It's tight but it's got a Neu 1515 2200kv running on 4s in it.. lol

[HOTWATER]

Good choice! Have you run it yet?

[Thomas Schlarb]

No testing yet..