Promarine?

[kfxguy]

And

http://www.promarinerc.com

[kfxguy]

I just text mike and he's sending me some bottom pics. I'll post them when he sends.

[SD Eracer]

HPR 115 and the Cheetah are two different critters. 11" difference in length alone.

Absolutely, but we actually have a guy with a Cheetah & another with an Ariane II Mono that runs that motor on 6S with a 180a ESC and been very happy with the results. Fast, cool, not abusive to batteries, and reliable.

For the HPR, I wanted a 6S setup with 2000kv but able to run the 180a ESC reliably, so the Leopard 4082 2000 4-pole was out. The SSS 4082 2000kv 6-pole seems to be a good fit for that based on my group's experiences with it.

This HPR 115 is TheShaddix's old hull, its gone through several motor/esc combinations over the last couple of years, but I expect about 85 - 90 mph on that setup.

[Doby]

And

http://www.promarinerc.com

Thanks!

[srislash]

I'm lucky we get to run here almost year round. Only thing that gets me at this time of the year is the rain. I think it's timed perfectly against me. It's clear during the week and raining on the weekend.

Hey, you in Vancouver Travis? LOL
Yup about same here.
My two bits here is that I really dig the Skater hull. I've been wanting to do a Stihl Racing for some time now.

[skater368]

These were not copied off anyone's hull or deck. FYI I ran with 2030 AQ motor and still smoked the class except my buddies AQ LO that was set up by me. This is a great handling boat. Trust me, you will see a lot of me around the country debuting and letting people run them. Why didn't I send out boats to test. Well I have 3 . 2 Skaters and the prototype MTR , as I have to call it. I'm not into having my stuff splashed and copied. If it happens , at least I sold a boat . Yes they are fast, yes they are stable, yes I am the only one who has ran it. Lots have seen it run and win. Questionable on the power? I have ran 10 sets of 6s runs on it. Never got hot, never acted funny and ran 67.3 with a tucked drive angle because of high winds . I'm very protective of my design guys. Nothing against anyone. KBB and I have spoken and texted. We will meet in Huntsville and go from there. Steve Miles Design did graphics design.
I promise you will love these.
These are not copies, but a design that I felt was needed. No one has done a tunnel like this either.
Yes I'm new to RC. But I have been racing boats, building props and rigging race boats. I started 37 years ago. So I know how boats and props work.

[skater368]

J[ATTACH=CONFIG]138748[/ATTACH]

[SD Eracer]

These were not copied off anyone's hull or deck. FYI I ran with 2030 AQ motor and still smoked the class except my buddies AQ LO that was set up by me. This is a great handling boat. Trust me, you will see a lot of me around the country debuting and letting people run them. Why didn't I send out boats to test. Well I have 3 . 2 Skaters and the prototype MTR , as I have to call it. I'm not into having my stuff splashed and copied. If it happens , at least I sold a boat . Yes they are fast, yes they are stable, yes I am the only one who has ran it. Lots have seen it run and win. Questionable on the power? I have ran 10 sets of 6s runs on it. Never got hot, never acted funny and ran 67.3 with a tucked drive angle because of high winds . I'm very protective of my design guys. Nothing against anyone. KBB and I have spoken and texted. We will meet in Huntsville and go from there. Steve Miles Design did graphics design.
I promise you will love these.
These are not copies, but a design that I felt was needed. No one has done a tunnel like this either.
Yes I'm new to RC. But I have been racing boats, building props and rigging race boats. I started 37 years ago. So I know how boats and props work.

Right on, I definitely was wrong to assuming your boat was simply a Cheetah copy with a different tale. After a closer examination it is quite different in just about every way. 6S on a 120a ESC with a 4075 2030kv does seem a little close to the edge, but I can be wrong about that as well.

Thanks for stepping up and building something for the community, I will definitely be looking to adding one of your boats to my fleet.

[skater368]

image.jpg
I am a World & National Champion Offshore Racer. Still race, but I race these too. I want a product you guys want and deserve. I didn't like the way other boats ran, that I owned. So I built a better one.

[skater368]

I haven't even touched the bottom yet. I saw 73.3 first time out on 6s and my prop . I didn't believe it myself. Still don't. But the guys with our club saw the gps.
Btw, the esc was 96 degrees after a heat race.

[kfxguy]

Here's the





Here's a cheetah for comparison. Definitely not a copy.

[kfxguy]

Right on, I definitely was wrong to assuming your boat was simply a Cheetah copy with a different tale. After a closer examination it is quite different in just about every way. 6S on a 120a ESC with a 4075 2030kv does seem a little close to the edge, but I can be wrong about that as well.

Thanks for stepping up and building something for the community, I will definitely be looking to adding one of your boats to my fleet.

The new seaking/dynamite 120 has proven to be a pretty stout little unit.

[skater368]

It's better than any previous esc they put out. I've been trying to make it fail. Push the limits so you guys don't have to. That's how I work.

[skater368]

NOTHING FROM THE Cheetah !!! ALL NEW DESIGN.

[ray schrauwen]

Nice boats. See the boat in my avatar?