I had one porpoise and it wascaused by the prop. Try something different. Or moving your batteries further forward.
-
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was -
The batteries is fully forward and at full speed is porpoise and flip off sometimesComment
-
Raise prop up.
1mm above
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
What prop are you running ?32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
For now im running Octura M445 but i allready order X442 X642 X640, Prather B220 and B215 and CNC prop X443
I also have the Octura V942/3 ,V940/3 and a X440/3 CNC prop
With the V prop never plane just bubbles and noise
With the X440/3 CNC to slow but good acceleration.
And ordered this offset bracket http://www.offshoreelectrics.com/pro...prod=ose-81522Comment
-
M445 should work well. Put the strut level and the bottom of it 2mm below the bottom of the sponsons.32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
I will try 2mm this time with level strut.
Also the cg you measured from the transom of the last sponson right???
IMG_5111.jpgComment
-
Originally posted by Nikolas Andriop View Post
Yes32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
Comment