Have not tried this using loctite904 on the motor side, always solder that end. Seems like a good idea. especially for older flex shafts with grease on them seems like u can't get all the impurities out. Any input would be greatly appreciated. Thabks mike
-
-
I haven't soldered the end of a flex cable for at least seven years. I use 603 and have never had a cable unwind or loosen. Note that I only use collet flex couplers, never a set screw type.
.ERROR 403 - This is not the page you are looking for
-
I solder them usually, or use loctite 603. Tried with 638 and it was way too thick. Definitely an important step though for when the cable gets crushed down.
This is a cool video that some may find useful definitely want to try it this way this season.Comment
-
Thanks fluid for ur quick reply , i only use that style collet also.Comment
-
Iridebikes247, awesome... Good way to tin big wires also.makes
Me wish i had my mig welder back...Comment
-
Originally posted by iridebikes247 View PostI solder them usually, or use loctite 603. Tried with 638 and it was way too thick. Definitely an important step though for when the cable gets crushed down.
This is a cool video that some may find useful definitely want to try it this way this season.
" Sudder "
Wisdom is knowing how little we knowComment
Comment