What to get for a 380L?

[fhhobbies]

What are some good boat kits for a 380L motor... rigger, hydro, cat.... I have 3S 2500mah packs I could use as well.

[ED66677]

26" mono would do it!

[fhhobbies]

Thats what it is in right now but was going to put a 540L in there and find a new home for the 380L.

[video200]

micro drifter works GREAT on a 380S Ü

[Dr. Jet]

Try the MHZ Miss Madison. Very nice fiberglass hydro. 17-1/4". Comes with strut, flex, and rudder. I have one that runs pretty well with an 1107/1.5Y/H NeuMotor on 2S. You have to be creative when laying things out to get it to balance. Randy Naylor's Micro Scat Cat might be another good home for it. You can get those in CF as well as ABS.

[fhhobbies]

Is there links to these boats? Thanks.

[Dr. Jet]

http://www.mhzusa.com/xtdoc/ http://www.bbyracing.com/

These represent both ends of the cost spectrum. The MHZ boat does not need a lot to get it on the water. You have to build the BBY boat (Randy will do it for you at a very reasonable cost).

[fhhobbies]

I really like the Madison but may be a little more then I want to spend on a micro though.

[Eyekandyboats]

http://206.206.85.209/xtdoc/Details.aspx?ProductCode=m-1734/40H&store=mhzusa

[fhhobbies]

Any other options out there?

[Eyekandyboats]

BBY micro scat cat would suite the motor perfectly!!!!!!

http://www.bbyracing.com/elecmicrohulls.asp

[fhhobbies]

Cool, what about riggers, any options there? Thanks for the help guys.