Carbon Fiber Inlay

[DRMead]

Considering doing a CF inlay to one of my cats after race season. Hull is a BJ 29. Can anyone recommend which size/weight mat would be sufficient?? Not looking to end up with a brick ,but more strength,and durability is the goal.Thanks ahead guys.

[kfxguy]

3k 5.7oz is what I like to use.

[kfxguy]

This that cloth...I did these this past weekend. I can give you an eBay link to buy it if you want.

[DRMead]

This that cloth...I did these this past weekend. I can give you an eBay link to buy it if you want.

KFX,Yes a link would be great. I'm guessin west systems epoxy for the job also?? Thanks a bunch.

[kfxguy]

This is the carbon I use. This should work at this width for you.

http://www.ebay.com/itm/Real-Carbon-...940ad7&vxp=mtr

and here's the epoxy


http://www.ebay.com/itm/Epoxy-Resin-...03613d&vxp=mtr

[DRMead]

Greatly appreciate the help. This ebay seller has a neat kit in red CF it's 2 x 2 twill 14" x 36" http://www.ebay.com/itm/100-Real-Red...item5b02716244 is this the same weight material as the link you posted above ?? Thanks again

[kfxguy]

Greatly appreciate the help. This ebay seller has a neat kit in red CF it's 2 x 2 twill 14" x 36" http://www.ebay.com/itm/100-Real-Red...item5b02716244 is this the same weight material as the link you posted above ?? Thanks again

Yes. I have some of that. It's not as easily contoured as the full carbon. If very very hard to cut unless you have kevlar scissors. Here's what it looks like in a daytona I did a while back.....

This is dry...before epoxy...




And this is wetted out. It gets alot darker.....most colored fabrics do this...



If you still want the red, hit me up. I can sell you some of mine.

[DRMead]

Travis,PM coming at you