boat cutting out

[dasboata]

Swordfish 2-6s 220amp Chris. The program box works well. They are more efficient at delivering power than the T-180's

I am going to change the motor 1st I have 2 of the 180's and they both crao out !

Chris
It is simple.
Change the connectors (those crappy 4mm) on the esc-motor side with 6mm.
Then run it.

Konstantinos

I'm going to look at that I think they are bigger ??

[srislash]

I am going to change the motor 1st I have 2 of the 180's and they both crao out !

Well one would think that rules out the ESC as suspect then.

That should point toward motor or batteries just not giving up the juice.

[dasboata]

Well one would think that rules out the ESC as suspect then.

That should point toward motor or batteries just not giving up the juice.

yup I am going that route and hoping the problem is in the motor

[jkr]

The problem is amon esc and motor connectors.

I run 6s/4074-2150kv/Seaking 180 with no problems.
All connectors are 6,5mm on lipos and 6mm on motor side.

[dasboata]

The problem is amon esc and motor connectors.

I run 6s/4074-2150kv/Seaking 180 with no problems.
All connectors are 6,5mm on lipos and 6mm on motor side.

I will check them thank you !!

[jkr]

I'll wait your results