NEW Jeti Spin 200 amp HV ESC

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ReddyWatts
    replied
    I have used and like the Turnigy HV controller on 8s.

    Leave a comment:


  • Eyekandyboats
    replied
    umm.. sorry Peells. but those esc will never compare to a hacker Jeti or a castle or MGM.

    Leave a comment:


  • peells
    replied
    HV 100 amp speed controller

    Hi just to pipe in on a less expensive alternative (I use this one) it costs a little more than 100 dollars and has not failed me yet running 2- 3s lipos in series they claim 12 s capable
    Attached Files

    Leave a comment:


  • Raydee
    replied
    Lotta bread, I never liked any of the Hacker/Jeti ESC's. The throttle control felt more like a on/off switch compared to Castle ESC's. Now if this ESC was way cheaper than a Hydra HV240 then I might consider it.

    Leave a comment:


  • Eyekandyboats
    replied
    thats been a while in coming.
    dont cross you finger for it

    Leave a comment:


  • ReddyWatts
    started a topic NEW Jeti Spin 200 amp HV ESC

    NEW Jeti Spin 200 amp HV ESC

    Looks like Jeti is coming out with a new ESC for you guys with deep pockets.

    Jeti SPIN 200 Amp HV Opto Brushless Speed Control ..... $ 547.80

    24-40 NiMH/NiCd, 6-14 Li-Poly, 18-59V. Two sets of 4mm input cables (2 positive and 2 negative cables), 4mm output cables. Due to the high voltage the SPIN200 has an ancillary circuit that prevents sparking when the controller is being connected to the flight batteries. The negative poles of the flight pack must be plugged to the two 4mm black wires first, then the thin (1.5mm) red wire must be plugged into the positive side of the flight pack. Only then can the two 4mm red wires be plugged into the flight pack.

    The controller has two 2-1/2"x2-1/2"x3/16" heat sinks and four standoff mounts to allow free airflow around all sides of the unit.

    2-1/2"x4-11/16"x1-1/16", weighs 270 grams (9-1/2 oz.)
    Attached Files
Working...