looking for a 50" or so deep V mono hull

[Fella1340]

Hello all, i am looking to purchase a 50" or so deep V mono hull. New or used. Flexible on size just needs to be
Suited to a fast electric setup and handle a 5692 motor running on 10s. The boat i originally bought will not work well. I am just waiting on an order from OSE and I will have everything except a boat. I choose a deep V as most of my running will be done on lake ontario and it can be quite rough. Saying that it will need to be shipped to
Canada. Thanks for any help you can give! Jeff

[iridebikes247]

This here is the MHZ ocean spray

http://www.mhz-powerboats.com/Ruempfe/Mono---S----750mm-/M------1400mm-/Ocean-Spray-Offshore-Boot---1230mm.html

Without the VAT it will cost you 230 euro which is 300 dollars USD, shipping will cost $100 from Germany, so in total 400 for this boat shipped door to door. If I was building a 50" mono I would go with this one for sure.

[madmikepags]

I have a RTR herzog Hurricaine (made by Aeromarine) 46-47" I think, with a big leopard not sure which one but will let u know tomorrow. 850 hull hardware speedo and motor, less motor and speedo 450, gotta check ship rates to canada. This is a very good race boat!!!!!

[lenny]

Hi,
What boat hull do you have that will not fit the build for you ?
Do you have any pictures of it or links to see it ?

Hello all, i am looking to purchase a 50" or so deep V mono hull. New or used. Flexible on size just needs to be
Suited to a fast electric setup and handle a 5692 motor running on 10s. The boat i originally bought will not work well. I am just waiting on an order from OSE and I will have everything except a boat. I choose a deep V as most of my running will be done on lake ontario and it can be quite rough. Saying that it will need to be shipped to
Canada. Thanks for any help you can give! Jeff

[Savage Skidoo]

Fella were in Ontario are you i'm in Ajax .

[Savage Skidoo]

If your on Fb you ca also check out Boaters and Crawler Durham .

[borgie]

dont know if this will help but here you go

http://www.horracing.com/product_info.php?cPath=37_60&products_id=446

and

http://www.horracing.com/product_info.php?cPath=37_60&products_id=498

[twissted]

http://www.ebay.com/itm/Atomik-Hull-...item4857b17141
priced right and shipping is cheap as well.

[Brushless55]

http://www.ebay.com/itm/Atomik-Hull-...item4857b17141
priced right and shipping is cheap as well.

Way Way over priced and from ebay to boot
at Tower much cheaper and includes hardware
http://www3.towerhobbies.com/cgi-bin...?&I=LXDLLR&P=7

and OP is looking for a Mono

[Doug Smock]

"Looking for a 50" or so deep V mono hull"

[Fella1340]

Hello all, thanks for all the help. I would love a mhz hull, I may go that route yet. As far as the hull I have not working out, well it was badly damaged in shipping, I will just leave it at that. It would have worked well for the rough though, wasn't meant to be I suppose. I haven't checked all the links below yet but I am defiantly looking for a mono, I would love to do a giant cat, they just menacing sitting in the water but lake Ontario is at my doorstep so a rough water boat is the way to go. As most of my running will be done 5 minutes from home so it makes sense to do a big deep V first that I can get a lot of run time on and then do a big cat that's all nasty and fast. My order from OSE arrived today and with iit the 300a swordfish esc, its huge! I am not going to rush this build, it will likely be not hitting the water till next spring. Its incredible how quickly everything add up! I will have to bucket (that's a funny word) $200 a month justi. In lipos alone between now and then just have enough for an afternoons running! I will check out that facebook thing, I didnt realize there was q clip around. I am in port hope so its less than an hour away! Off I go to check out the leads you have provides. Thanks

[Fella1340]

Please, don't mind the spelling and grammar above, typing from my phone and it has a crazy spell check/ correct program that does a great job of finishing off any mistakes I make!

[Jason4636]

MHZ Mystic 7700 Study. It's a 56" mono, it's not that deep of a V.

Here's some info and pictures from my build.
http://forums.offshoreelectrics.com/...ono&highlight=

[tiqueman]

Fella I sent you a PM

-Scott

[dirtnsnowrider]

I have a 47" vee hull. It came in with a full gas motor set up. The paint is an ugly gold that I am currently sanding on and will primer then paint this boat. From the research I have done this looks like a TFL Warrior hull, but the hatch is different. If you would be interested in this hull let me know. I can even paint it for you any color you want. Here are some pics of the boat(i just started to sand and do some body work to fix the gel coat chips and a few cracks.

DSCN3220.jpgDSCN3221.jpgDSCN3222.jpgDSCN3223.jpgDSCN3224.jpg

If you end up liking this hull I can work you a killer deal for it. Its a second hand hull but when I get done with it it will be like new. The hull is drilled for an Aeromarine rudder system. I was going to fill the holes before painting so the hull would be ready for whatever hardware system is thrown at it.