Fightercat Daytona question

[SuperD]

Excellent thanks for the info. I'm still wondering about the 1300kv. But I'll try it, new motors in higher kv are relatively cheap.

Hey for sure try with the 1300kv, I would suggest if you can afford it go with the T180 esc. It will give you more headroom for future experimentation and is a solid esc.

Here is the innards of mine to give u some food for thought. Shes a tight fit so she dont look pretty. :P

Daytona_guts.jpg

[lenny]

Check with Shawn I think he had a problem like that at one time,
But not sure on that.
http://forums.offshoreelectrics.com/...37-quot-Komodo

Also fastvee had a problem with a mono with twins to,
And had to work it out.
Look in his started post and you may find the info you need,
But not sure on that.
http://forums.offshoreelectrics.com/...ors-first-test

[ls1fst98]

Great looking boat, what about that adjustable servo y harness. I think it was made to solve thus kind of problem. Not 100% though.

[ls1fst98]

yea i am definitely looking at the T180 esc or if i can get another suppo 200a, i have one in my mean machine. i need to finish that hull as well. i have everything just never finalized it.

[ls1fst98]

ok so i went ahead and sprung for the t180 esc seeing as id like to buy it once and be done versus going with a 120 and risking blowing it. hk had some in stock this week in usa so snagged them. having a hard time finding props. id like to stick with the carbon props for testing then when i find something close to what it likes go with metal or cnc but i cant find a set of counter rotating props.

[SuperD]

ok so i went ahead and sprung for the t180 esc seeing as id like to buy it once and be done versus going with a 120 and risking blowing it. hk had some in stock this week in usa so snagged them. having a hard time finding props. id like to stick with the carbon props for testing then when i find something close to what it likes go with metal or cnc but i cant find a set of counter rotating props.

Great news on the T180s. I never ran carbon so not sure where u could look. I ran x442 from octura and am currently trying out CNC x445. Temps in the 445 are high on the motors it acceptable.

[tiqueman]

Graupner makes carbon filled props. OSE has some in reverse in the 40 and 45 dia.

[ls1fst98]

Thanks guys. Look forward to getting the carbon played in this hull this week I hope. Weather permitting since my wife won't let me use the kitchen counter for that


Tiqueman, thanks I will look into it. I will also be calling you soon. Had a hectic weekend with my girl turning one so had a big family party.

I will get pics up of what I have so far and of course of the carbon. I'm working on laying out the hatch windows and painting them today.

[tiqueman]

No worries. Im getting ready to venture into the garage now to do a couple CF laminations for some customers.... it is HOT out.