Max motor; lipo and esc tempature ?

[Andris Golts]

Hi all installed Leopard 2860 4050 kv motor and a Seaking 120 amp esc in my 21'' sport hydro using a 2s lipo for power and x432 prop after a 1 1/2 minutes of run time motor and esc temp at 90 farenenheight. What max temps could motor esc and lipo's endure with out damaging any components ? Regards Andris Golts.

[Fluid]

Anything under 140F should be okay. Lower is better and remember that unless you take the temperatures immediately they are useless.



.

[madmikepags]

like fluid said, I usually add 10 degrees to whatever temp I read to be realistic.

[Andris Golts]

Thanks for the great information. Regards Andris Golts.