I am looking for a good setup Deltaforce 33 " cyberstorm.

[lenny]

Well this beast may be what you what for your hull,
6S to 8s so they say.


http://www.hobbyking.com/hobbyking/s...ion_40mm_.html

29357.jpg

[Brushless55]

Well this beast may be what you what for your hull,
6S to 8s so they say.


http://www.hobbyking.com/hobbyking/s...ion_40mm_.html

[ATTACH=CONFIG]99268[/ATTACH]

That's because its a EDF motor
6s to 8s depending on EDF unit

[lenny]

That good,

Just told me he ordered one of these for the hull, 2250/9 1315kv http://www.rc-raceboats.de/shop/lng/...erie-2250.html
And jacket,http://www.rc-raceboats.de/shop/lng/...fuer-22er.html

I can not what to see this thing running.

[carlcisneros]

CChevy
I have been running the TP Power 4092 1600KV motor on 6S and have not had any problems with heat and such.
I run a 445 or 447 using surface drive (stinger) depending on what I want to race with.
It is a delta wind so run the timing around 3-5 deg. max.'

[SSchevy98]

CChevy
I have been running the TP Power 4092 1600KV motor on 6S and have not had any problems with heat and such.
I run a 445 or 447 using surface drive (stinger) depending on what I want to race with.
It is a delta wind so run the timing around 3-5 deg. max.'

thank you carlcisneros for this

what esc are you using? What batteries are you using? do you have a video that boat ?


My deltaforce 33 setup is :

TMM 25035-3 X-SERIES esc.

Props. octura m445/2, x440/3,x450/3 and x452/3 .

Lehner 2250/9 1315 kv motor + thunderpower pro force 4s 6600 70 C batteries series.

[carlcisneros]

I am using the FC 16S 400A esc (kind of over kill, but what the heck, I had it handy. LOL)

the other info you requested is in the PM I replied to you.

[SSchevy98]

Update,

the boat is almost ready to glue the motor mount to keep the boat and onto the drill with a few holes and has found a place in the batteries

[lenny]

That does not sound to good,
If I am reading this right.

And carlcisneros,
What pm I did not get one or the memo for the info.

[SSchevy98]

Battery

http://aijaa.com/Bb9xgV

What do you think that battery ?

[lenny]

Ok,
So what is going on ?
You have the boat setup and it is in the water and you are doing so prop testing with a x446/3, Yes ?
Can you post some video's of the boat running ?
And can post some pictures of the boats hardware setup for running and the setup in the hull to ?

[SSchevy98]

Hi Lenny,

I'll post a video and pictures when I have time,the boat is still a bit to adjust.

[SSchevy98]

The speed control temperatures of 33 ° C and motor temperatures of 31 ° C .

X446 / 3 prop maximum 138.9 amps and the power of 4200 watts.

[lenny]

Ok,
What boat are you talking about that was leaking ?

I am not sure what you are asking me or till me with this,

Is the boat staying dry now ? What size of silicone hose you will get 8 mm propeller shaft tube on top of the water-tight?

i use 8x4 mm silicone hose, and I do not get it in any of 8 mm on the tube?

[SSchevy98]

Hi Lenny,

No water in the boat any more than a few drops.

[SSchevy98]

here is pictures

http://aijaa.com/bPcUcC

http://aijaa.com/RKrsYa

http://aijaa.com/lZtg5s

http://aijaa.com/E822PD

What do you think ?