Best motor for my miss elam 1/12 brushless hydro

[ncp546]

no you bought the original motor. you dont need to purchase from proboat to get their item you know. the stock 1500 is a good motor, with a x642 youll get into the upper 40s

Phew okay im fine with my decision then, i know i could of done better, but im happy with it.

[Heaving Earth]

do you have a link to the motor you bought?

[ncp546]

do you have a link to the motor you bought?

Here you go the exact page and everything.

http://www.amazon.com/Pro-Boat-ProBo.../dp/B000SC1WXY

[tlandauer]

no you bought the original motor. you dont need to purchase from proboat to get their item you know. the stock 1500 is a good motor, with a x642 youll get into the upper 40s

Heaving Earth is absolutely right, I asked because I wasn't familiar with Proboat's numering system, I bought the 1800kv used here on the Forum. No need to regret!

[tlandauer]

Oh, my bad in saying a 45mm wouldn't clear. However, if I were you I would start with a 42mm prop. The x642 is good to start. Get a well balanced prop here, it is an investment. The Proboat metal prop is heavy and not really well balanced , it will wear out your components quickly if not further balanced.

[Heaving Earth]

yup you got the right one. no worries

[ncp546]

Phew thanks so much guys for all your help. This might sound dumb, but can i get a good plastic prop from somewhere? Ha,