Brushless Villain

[kahnen]

Well I figured I would let the other thread die, its quite a few pages back anyways.

I finally was able to get everything in place. Good weather, no work, and free time for boating.

So heres the latest vid of the boat, same setup but this time without the wind to slow me down.

http://www.youtube.com/watch?v=sJCin9WVhFM

[ReddyWatts]

Looks good!

[blastoff]

How about a picture of the current setup
I luv my Villain !!! Just did a prop kit
and now I luv it even better !!!

[kahnen]

Its running the proboat bl motor, Mystery 80a esc, ZippyH 30c 3500mah 4s1p lipo, CF 45mm prop with a Speedmaster stinger strut and custom rudder and turnfin. I'll try to get a pic later today.

[kahnen]

Set up pics

Don't mind the flex cable grease

I made a shelf for the lipo to lay on that velcros to the hull and use a velco strap to hold the lipo down. I place a little piece of sponge under the shelf to absorb any water that might be sloshing around.

I don't have any pics on the computer of the hardware end, I guess.