I bought some time ago this catamaran: http://www.fuyuanrc.com/detail.asp?id=15703, Someone knows it, there are some reviews on it?
Vantex audi r8 catamaran
Collapse
X
-
Whoa! Little different twist on the looks................... Big 50 incher too.
If the bottom is up to snuff, its running a 'decent' motor 650kv, it outto go OK. The sponsons and business end dont care that there is a car on top LOL!Attached FilesNEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
Hi Guys ,
I guess this peculiar looking Cat was developed for those that still want to hold onto their R/C Car Roots !!! Lol
Brad
OzRoy Cooper's www.fastonwater.co.uk - Where Brittish Raceboat History Comes To Life !!!
Comment
-
Unfortunately, the ARR version has a brushless outrunner 650Kv http://fuyuanrc.com/en/detail.asp?id=16429 by pulling very little indeed accepts up to 7s. Because all the hardware is already in place, I do not want major changes to the hull, so I prepared for this cat a leopard 5692 by 540Kv motor with 10s, then I was advised to start a propeller from 60-62mm and finally found a speed controller HV 280A. We hope that everything will be fine and that I will reach a satisfactory speed!
Comment
-
-
Does that canopy actually have "ventilation" fins in it?Originally posted by runzwithsizorz View PostLets unwrap her, and have a look. http://www.youtube.com/watch?v=popP_...eature=relatedMy private off road rc track
https://www.youtube.com/watch?v=XC3H...yaNZNA&index=8
Comment
-
Thats funny. You realize that video is the gfreakracing guys?Originally posted by runzwithsizorz View PostLets unwrap her, and have a look. http://www.youtube.com/watch?v=popP_...eature=related
Comment
-
The "out of the box" non upgraded components should perform like this. This is the another fuyuan boat - Aqua Mania knockoff. Same size, same setup except different rudder. And unfortunately a "gfreak racing" video.Originally posted by JESTER View PostI had already seen that video, I'd like to see it in action, but probably in the network are not there, oh well I'll set it up when I finish some videos!
Comment
-
Hi kevinpratt823 the canopy has a grid of ventilation, but I wanted to close it because I think that with an electric is better, but since it is only recently that I look into the world of rc boats, clearly accept advice from those who have more experience than me. I think that the air intake is to be left open in the case of a combustion engine ... right?
Comment
-
Yes the vents are for IC, you want it water tight for FE.Originally posted by JESTER View PostHi kevinpratt823 the canopy has a grid of ventilation, but I wanted to close it because I think that with an electric is better, but since it is only recently that I look into the world of rc boats, clearly accept advice from those who have more experience than me. I think that the air intake is to be left open in the case of a combustion engine ... right?IMPBA 20481S D-12
Comment
Comment