Fall/Winter builds?

[Cooper]

Going to build a fantasim hull want to run on 10~12s. Only thing I have so far is a pair of stingers. Xmas presents hopefully bring some cc speedos and motors. :)

[srislash]

I've got this Cat that I have twin Castle outrunners to build
Komodo 003.JPGKomodo 001.JPGKomodo 002.JPG

And going to do a R-42 with 1717's and CC 200 HV's to run against the gas guys next year.
And I still have the Bling Rocket(aka: Pursuit) with a CC 1515 2200kv to run with the other FE guys locally.

And really hoping I'll get to rebuild a FC Shocker.

[properchopper]

I'm getting a little burned out building 'em, so I'm going to pick up one of these nifty RtR's :

http://www.youtube.com/watch?v=RJVCEFqBpXM

[capnswanny]

That looks so scale, I want one!.....maybe two?!?

[gb tiggycat]

I have a Graupner PX-1 41" cat that has been around for a while. Already have 2 Turnigy T600 1400KV outrunners to run on 6s. Just need to get started!

122.jpg124.jpg

[egneg]

What shove?

m going to do up a aromrine U-40

This one ... don't know who made it.

S5000556.JPG

[T.S.Davis]

Do they have to be deffinite builds or can they be on the want ta list?

Specky PT Stealth Sport
Q hydro (rigger)
Q Cat (does anybody know of a good heat racer that isn't a SprintCat?)
1/8 Scale Circus Circus twin wing (this one is a money black hole so it may take a while)
T mono (scratch built from wood if I can fit it in)

...............please don't tell my wife.

[Chilli]

How about the Fightercat Cheetah. They look promising but havent heard how they do in race water. Supposedly a Sprintcat bottom but much better looking.

[properchopper]

How about the Fightercat Cheetah. They look promising but havent heard how they do in race water. Supposedly a Sprintcat bottom but much better looking.

Just built one for a customer. Leo 4082/2000KV/4S2P/X447. 57 mph on first wet; corners like a bobsled. P-Offshore anyone ?

DSC03602.JPG

[RaceMechaniX]

A 141mph FE SAW Rigger, a 100mph Gas SAW rigger and 125mph nitro SAW rigger. That should be enough for the next year.........
TG

[properchopper]

A 141mph FE SAW Rigger, a 100mph Gas SAW rigger and 125mph nitro SAW rigger. That should be enough for the next year.........
TG

Better make that 141.37 if you want that record

[RaceMechaniX]

Give or take yes, but I don't think we have the minimum to break the record in NAMBA. I couldn't find it in the rule book.

TG

[ray schrauwen]

I have a whiplash sport 20 on the wish list. Siberianhusky's whip is gonna need some company on the water next spring.

I have one to sell if interested. Straight, solid, well painted. Handles chop well. Since you're in Canada I'd give you a deal. LMK...

[ray schrauwen]

Do they have to be deffinite builds or can they be on the want ta list?

Specky PT Stealth Sport
Q hydro (rigger)
Q Cat (does anybody know of a good heat racer that isn't a SprintCat?)
1/8 Scale Circus Circus twin wing (this one is a money black hole so it may take a while)
T mono (scratch built from wood if I can fit it in)

...............please don't tell my wife.

Cheetah with 1360kv 5682 leopard.

I have also ran a Promise Hobby 29" cat with T600-1400Kv outrunner, 5S2P (Bill ran 6S2P in his) Mine Turning a D/T x450. It was a blast to drive and I might get another T600 to put in there for next year. Ran it in Open Cat and it was a blast doing 50MPH. Mybe not the best cornering cat but, not the worst. It packs little air similar to an Insane Cat hull.

[T.S.Davis]

How about the Fightercat Cheetah. They look promising but havent heard how they do in race water. Supposedly a Sprintcat bottom but much better looking.

We have two of those. I haven't seen one run on 6s yet. It's a dog on spec power. Should rip with a real motor. Not sure it's enough boat for Q though. Q boats leave some pretty good sized holes. Maybe with the cells down in the sponsons.

Just got an offer from a good builder to sell me a killer carbon kevlar twin wing painted with hardware for a great price.........ugh. The plot thickens. I was thinking maybe a bank job.