In at the Deep end!

[RichRC]

Hi OSE!
Im new here so firstly thanks for adding me.
Im new to RC building ( so i decided to go for boats First!) I have built a 23" Deep-V and i have a Brushed 550 9600rpm motor and i was hoping you could advise me on an ESC and what Props to buy.
Any Help Will br Greatly Recieved. Thanks RichRC

[jamespl]

Where abouts in the UK are you?

[RichRC]

im not Far from bridlington, but i dont have transport at the moment otherwise i would see those guys ( im in Hull, yeah go Figure!)

[RichRC]

im not Far from bridlington, but i dont have transport at the moment otherwise i would see those guys

[jamespl]

I'm in the midlands. Bit to far for me to go lol

[RichRC]

IMG_0165.jpgIMG_0166.jpgIMG_0167.jpgIMG_0168.jpg


This is my Mono hull. What you guys think? i have Decided to Completely start from bottom up ( as this is my first ever boat ) all comments are Welcome. Thanks RichRC

[expresscraft]

looks like you are off to a good start.

[RichRC]

Hey guys I'm back!! Had to take some time out due to illness so I've been giving this Hull (above) a stiff coat of looking at and I think Its going to be too heavy, 650g at this point, without painting or any of the parts in it, advice please if you have any! Thanks in advance RichRc