what is the best

[fatbill69]

i didnt find any vid on the site

It's on the home page! You can't miss it! And it with a p-spec motor. I just watched it.

[properchopper]

What I am truley looking fore is a excellent quality built hull one that is capable of a varity of speed setups (looking to find what is the most sought after) I want my next boat to be the best on the market one that
will drop the jaws on all the other racers in my club. but there are so meny out there to chose from and I'm not all that exsperienced in haw to chose a quality boat at this point in my rc growth so I'm turning to yall for help befor I drop allot of money on a lemon. And I really appreciate all of you sharing your experience with me. Thank you all

You're in luck, Bro. Jaw dropping, 70+mph, superb quality.

http://www.youtube.com/watch?v=oOODO4aEeP8

Zi6_0614.jpgZi6_0613.jpg

And yes, you'll be dropping a lot of money for one of these, trust me

[runzwithsizorz]

Interesting controller, (tx), in pic 2, what is it????

[properchopper]

Interesting controller, (tx), in pic 2, what is it????

Probably one of these : http://www.futaba-rc.com/systems/futk4901.html

[madmikepags]

race or play? most clubs do not have specific race classes for cats, you need to run them against riggers. Some of the Highest quality built hulls are not necessarily good "race" hulls.

[elijah]

cool what is it and wear can I get one? is that a fighter cat?

You're in luck, Bro. Jaw dropping, 70+mph, superb quality.

http://www.youtube.com/watch?v=oOODO4aEeP8

[ATTACH=CONFIG]83786[/ATTACH][ATTACH=CONFIG]83787[/ATTACH]

And yes, you'll be dropping a lot of money for one of these, trust me

[dana]

It's an hpr I believe.

[properchopper]

cool what is it and wear can I get one? is that a fighter cat?

The hull is an HPR C5005. Comes from Europe. Tyler G. built it for a customer of his. I'd not be far off to guess that it easily pushed six grand if not more. If you're serious I can put in touch with Tyler. OTOH for far less money I can build you a boat like the 34"FighterCat Cheetah I'm now building for a customer. Anywhere from 50mph to 70 mph for 1.2K to 1.5K. complete. Hit me at rcboatbuild@hotmail.com - no PM's plz

DSC03505.JPG

[elijah]

this hull dosn't look the same as the one above the dack is totlely diforent as are thr forks

The hull is an HPR C5005. Comes from Europe. Tyler G. built it for a customer of his. I'd not be far off to guess that it easily pushed six grand if not more. If you're serious I can put in touch with Tyler. OTOH for far less money I can build you a boat like the 34"FighterCat Cheetah I'm now building for a customer. Anywhere from 50mph to 70 mph for 1.2K to 1.5K. complete. Hit me at rcboatbuild@hotmail.com - no PM's plz

[ATTACH=CONFIG]83794[/ATTACH]

[dana]

Omg...

[elijah]

not trying to be an ass or seem un greatfull in any way but they don't look the same the white one has a raised deck near the coule and the one at the top dosn't also the teardrop coul is streatched out forther tword the transom on the one in the vid. at the top the forks on the white one's forks have longer tips then the one obove as well sorry just saying whats up with that why am i seeing it so diforent

Omg...

[madmikepags]

still haven't told us how much you have to spend or is it a race or play boat you want? or you just want something that looks really cool and goes 70mph?

[gb tiggycat]

Not sure that just impressing fellow club members is a real good reason for spending lots of wonga. You might be better to consider buying something that you can get to perform in such a way as to make their jaws drop, and it doesn't sound that you are far enough up the learning curve to achieve that.

[elijah]

my reason for starting this thred do you have any input that might help me out

Not sure that just impressing fellow club members is a real good reason for spending lots of wonga. You might be better to consider buying something that you can get to perform in such a way as to make their jaws drop, and it doesn't sound that you are far enough up the learning curve to achieve that.

[expresscraft]

propperchopper said the hpr boat was around 6000.00, and posted a pic of a hull he has that he could build for 12-1500 to get you near the 70 mph you want,im sure he could recommend a different hull if you don't like the looks of the one he has, but that seams to cover the high and low end of what's out there.i saw the hpr boat at Doug's shop when it was getting painted, its not a very big boat, but it was very nice.Thanks for the info and video.research ,research,research then build your boat. that's where I'm at right now. i would not expect to get all your answers on one thread.