1/4 steg strut to 3/16

[sampit]

Hi,Can anyone tell me what i need to convert a 1/4 Skeg strut to take a 3/16 cable
also could i use these as well with the 3/16 cable

http://www.horracing.com/index.php?cPath=52_90_110

thanks in advance


Sorry skeg stut not steg strut as title

http://www.horracing.com/product_info.php?products_id=440

[srislash]

Holy,I can't seem to find one Sam.Just a complete one.Southriver shows 1/4 cable and shaft down to 3/16 http://southriverrcboats.com/shop/ar...DS250-187-0%26 but that is all I have found.Jim's good.

[RaceMechaniX]

You can build up several concentric brass tubes to choke down the ID of the strut from 5/16" to 1/4". I believe you need a section of 5/16" followed by 9/32" then use 1/4" brass stuffing tube from there.