Toysport Jollycat Owners

[Ub Hauled]

I run my single drive jolly on 6S1P and a Neu 1521 1.5D and she is very fast!! Good luck wth yours! Post up some photos when you get it.

I have seen this puppie go, and let me tell you, it has a need for speed ... it actually jumps around at slower speeds

[macke]

I run my single drive jolly on 6S1P and a Neu 1521 1.5D and she is very fast!! Good luck wth yours! Post up some photos when you get it.

Sounds like a nice setup :-) I will post a bunch of pictures when I recieve it. Its just difficult waiting for three weeks, I am a very inpatient man :-)

[DISAR]

I would like to ask Macke from Sweden: Where did you buy the boat from (USA or Europe)? Can you please give the web address? Because I am from Greece and planning to buy one (that one or M1 supercat or Intruder) but the big box would be a problem in customs and expensive shipping.

[macke]

I would like to ask Macke from Sweden: Where did you buy the boat from (USA or Europe)? Can you please give the web address? Because I am from Greece and planning to buy one (that one or M1 supercat or Intruder) but the big box would be a problem in customs and expensive shipping.

I bought mine directly from ToySport (http://www.toys-port.hu) and since hungary now is part of the EU you don´t have to pay any extra VAT as you would have to, if it was sent from the US. Also I wanted them to deliver a completely RTR boat for me since I am not a very handy man :-)

[DISAR]

Thank you very much. Enjoy your boat and all the best. Just for info if you want good lipos at super prices http://www.rclipos.com/ (the free shipping is true). Also makes discounts if you ask. Check for the Elite brand.

[macke]

Finally my boat is on her way to Stockholm, should have it here by end of the week

[macke]

The boat has finally arrived And it looks great Question though! What strength Lipos do you recommend running the Feigao 540-09 motors?
Thinking about 18.5V 4300mAH 5Cells recommendations please

[NorthernBoater]

I assume those are 9XLs and I would recommend running each motor on 4s.

[G Doggett]

I assume those are 9XLs and I would recommend running each motor on 4s.

I have powered mine with a pair of Ammo 2300 motors on 2 X 4S lipos and it flies.
2 9XLs will be rocket ship on 2 X 4S. Hang on tight.
Graham.

[macke]

Yep! Thank you for the advice! I will go for the 4S then

[video200]

what was the total cost come up to in SEK ?