Please Help me recovering mine boat...alll ideas are welcomed...

[Drax21]

...After 8 months ...the boat appeared.......!!!?!?!??!!?!!!!!




I will see what i can do for it....



Best Regards, and thank for all the help!

That is amazing, can't see the link but 8 months later is still amazing. If anything still works that will be something. Is the hull ok?

[gerardobrandao]

Hello Drax


That NEU1527 1.5D will work, or my name isn´t Gerardo Brandão....it has been flooded with WD40 and it will remain that way 1 week...After that i will see if there is any short circuit betwen an phase or gnd(outer case)

After that will try it....

It has been submerged for 8 months on non salt water, with low mineral content...if motor work, it will prove NEU quality that is well known..rest assured...


Best Regards...The work will start next weekend...

[Drax21]

Hello Drax


That NEU1527 1.5D will work, or my name isn´t Gerardo Brandão....it has been flooded with WD40 and it will remain that way 1 week...After that i will see if there is any short circuit betwen an phase or gnd(outer case)

After that will try it....

It has been submerged for 8 months on non salt water, with low mineral content...if motor work, it will prove NEU quality that is well known..rest assured...


Best Regards...The work will start next weekend...

Hope it works for you! Would be nice to have a happy ending.

[gerardobrandao]

..More pics of the Boat.....



Batts....




Flex coupler and servo





Hardware T7075 Aluminum with high grade of electrolitic corrosion...




More clean boat...ready dissemblance.... sanding...primming and paiting.......




What are the bets for a working NEU 1527 1.5D after 8 months of submersion and a schulze 32 200...!!?? :D

[RaceMechaniX]

Glad to hear you found it Gerardo! The motor might work with new bearings assuming the varnish was not eaten away. I am pretty sure the Schulze is done.

Tyler

[graill]

You realize the only paint jobs you can put on that hull now is a Ghost ship theme or a Phoenix (reborn after death) theme. Grin.

Nice to see you got your.....salvage back.

[srislash]

You have got to get that running again.Ghost ship for sure.

[Make-a-Wake]

Glad you found it and now have some "closure" to the saga. The thorough dousing of the DW40 is a great Idea, I also did it to my Castle 2028 after a week underwater, and it works fine now!! Remember to save everything you can though, bullet connectors, wire, servo horns, collets if they are still usable etc etc...........

Your hardware and prop look good!

[gerardobrandao]

..Now DF 35 look like this.....

uploadfromtaptalk1347125548254.jpg


Thank you everyone for the help.... :-)

Sent from my ASUS Transformer Pad TF300T using Xparent SkyBlue Tapatalk 2

[Chrisg81983]

Very nice glad it all worked out for you